New profile posts

What's new New posts New profile posts Latest activity
C
I live in San Diego and cannot find anyone to work on my rear brake hub. My bike was purchased in 2011 and my rear brake is almost gone. Can any one help me?
Jeremy McCreary
Jeremy McCreary
Try Leucadia Cyclery in north Encinitas. They'll happily work on ebikes they didn't sell, including my Canadian Surface 604 hub-drive. Reasonable rates. Owner's a nice guy.
Fingers
Hi Frank! Thanks for saying Hi! Vicki & I used to live on our sailboat there in Delaware City and know the area well, Vicki was working at Drexel at the time. We both loved the area, loved Wilmington (especially The Dog House and Porto Fino's!).
N
Western Nevada
"We must reject the idea that every time a law's broken,
society is guilty rather than the lawbreaker,
It is time to restore the American precept,
that each individual is accountable for their actions."
luka1002
Upgraded brakes from Tektro to Shimano SLX M7120.



photo_2024-07-03_14-01-41.jpg
photo_2024-07-03_14-01-39.jpg
  • Like
Reactions: Ken Shopken and Stefan Mikes
Stefan Mikes
Stefan Mikes
Not to judge but in what sense are the Shimanos an upgrade to Tektros?
luka1002
luka1002
This is Brake 4-Piston Caliper and it brakes aaaa lot better compared to Tektro. Also pads for this are double amount of spareable part.This is really need, i do a lot downhills on pawed road and Tektro failes a lot on high speed (> 50km/h)

Luka
Stefan Mikes
Stefan Mikes
Is the SLX M7120 Flat Mount or Post Mount brake?
A
Tom, what battery balancer did you use? I have the Z1 and am impressed on how you did this without ruining the thing.
Tom@WashDC
Tom@WashDC
Yes, I fuond it on Amazon. Type this in the search bar.

Higo Double Battery Discharge Converter for E-Bike 750w and 1000W Dual Battery Pack Switch Balancer 24-72VDC (Max Current 40Amp)​


For some reason I can't post the link directly.
Tom@WashDC
Tom@WashDC
Inserted it in the space here, at the base of the seat tube.
luna_z1_02__35366.jpg

cradle.jpg



I drilled a hole in the plastic motor guard and ran a connector for the seconf battery. The battery cradle is made of rubber but you can use wood. The cradle is secured by one bottle boss screw.
Rocko19661
and need help after conecting + - wrong now my ebike run but when i try to go to full throttol it shuts off i put a switch on +of line to battery and controler i can turn it off then back on it well work to turn the power on but the same thing as i pull throttol for hier speed it turns off unless i eather try throttol from reel slow lo to hi i may get it to go fast some times is it battery bms or??

=
HyperJ
love the pictures of your trips IMG_0284.jpeg
  • Like
Reactions: Jeremy McCreary
R
Rien
Beste jeremy
bedankt voor je reactie ik heb nog een foto van verende zadelpen die prima bevalt voor mijn nek, bande druk 2,2 is prima.
ok voor garantie een nieuwe Mviolo gekregen nu een heavy duty hub veel beter in het gebruik
groeten
Rien

Attachments

  • IMG_1391.jpeg
    IMG_1391.jpeg
    253.7 KB · Views: 574
  • IMG_1397.jpeg
    IMG_1397.jpeg
    529.8 KB · Views: 597
HyperJ
I have finally worn out my 2019 Haibike. Battery is at 2/3 power with a full charge. Motor was surging yesterday on a 26 mile power ride. I ain't complaining, I got 5 years out of the German built and imported 350 watt mid drive motor, Very happy with the results and the ride life I have had with it. RIP little 350 watt.
C
chowchao
When the battery is low, you should turn off the power and avoid riding with regenerative braking to prevent severe depletion, thus extending the battery's lifespan.
O
See an example here. How is it possible for a 52v battery to work with that controller if the das kit ct5-15 mosfet has 60v and the battery voltage at full charge is 58.8v?
O
Hi.I need some advice. I would like to buy a new battery with the new 21700 cells. I found a lot of ads on aliexpress, even on amazon where they sell 52v batteries for NCM Moscow. Can you confirm for me if the Das-Kit CT5-I5 controller can work with a 52v battery?

Attachments

  • 1714902991859.png
    1714902991859.png
    400.8 KB · Views: 515
Jenny Mao
Jenny Mao
Hello. pls refer the another post.
@Bitmugger has shared their experience with 52V Dorado on Moscow.

forums.electricbikereview.com

Just received a new Dorado 25ah battery

@Sandy77 If you didn't buy your battery from @Jenny Mao then there is a really good chance that your battery labeled "25ah" is no where near actually being a 25ah battery. Battery makers lie. Jenny doesn't lie. Her 25ah batteries are actually 25ah. Here's a 48V 30ah lithium battery from...
forums.electricbikereview.com forums.electricbikereview.com
Back