Will pitlock fit for CCX?

[mark_anderson_us]

Hi All

Just ordered my CCX and getting a body float. Does anyone know if pitlock will fit and if so, is there a specific model that I need thansk

Mark

 

[youth]

Doesn't answer to your question about pitlocks, but I wanted an antitheft solution for my front wheel, seatpost, saddle, & stem, & went with these guys https://hexlox.com/

I don't know how well they work though since I don't leave the bike locked up outside for any extended period of time.

 

[mark_anderson_us]

Doesn't answer to your question about pitlocks, but I wanted an antitheft solution for my front wheel, seatpost, saddle, & stem, & went with these guys https://hexlox.com/

I don't know how well they work though since I don't leave the bike locked up outside for any extended period of time.

Thanks Youth. looking at the saddle and seat post set (https://hexlox.com/collections/read...otects-saddle-seat-post?variant=5518517174302). What sizes do I need?

TIA

MArk

 

[youth]

Thanks Youth. looking at the saddle and seat post set (https://hexlox.com/collections/read...otects-saddle-seat-post?variant=5518517174302). What sizes do I need?

TIA

MArk

You'll need to add the "Quick Release Seat-Post Binder Bolt" which uses a 5mm hexlock to replace the quick release . For the saddle it looks like the Body Floats uses 6mm bolts (https://cirruscycles.com/collections/kinekt-post-accessories/products/seat-clamp-bolt-assembly) to so 6mm inserts for that. I use a Suntour suspension seatpost which is secured to the saddle with two bolts on the sides, but figure it's enough to use only 1 hexlock on one side.

 

[DavidinFL]

Different approach but this is what I'm using: Allen Security Bolts: https://www.amazon.com/gp/product/B07B4V11RS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Odds of a thief having a security allen key are rare
Using this with a standard seat clamp

 

[mark_anderson_us]

Different approach but this is what I'm using: Allen Security Bolts: https://www.amazon.com/gp/product/B07B4V11RS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Odds of a thief having a security allen key are rare
Using this with a standard seat clamp

thanks, but if I were a serious bike thief, I'd definitely have a set of those allen keys. They stump an opportunist but not a pro

Thanks for suggestion though

 

[mark_anderson_us]

Ended up getting the Abus NutFix https://www.abus.com/eng/Mobile-Security/Bike-Safety-and-Security/Locks/NutFix

Nice thin is that it requires no special tools (except skinny 8mm wrench)

 

[mark_anderson_us]

Unfortunately nutfix did not fit.

I emailed juiced before my bike arrived and they said seat post if 34.9mm, so i ordered 34.9mm nutfix (largest they have). Doesn't fit: there's no way I can expand it to get it over the frame tube. I tried using the nutfix nut, but with existing collar, but it's too wide to tighten all the way down I have a suspension seatpost so very eager to protect it for theft. Seem largest that pinhead do is 34.9mm.

 

[mark_anderson_us]

found my calipers. out diameter is 36mm. can't find anything that works