ST1 change from MPH to KM/H?

Yes...let me see if I can find the documentation. Ther is a separate sheet w/ the instructions for just this one feature change... Be right back

Mark

Hold power and + for 3 sec brings up code0000 set it 0003 this returns 0 or 1

0=kph
1=mph
Hold power for 3 sec to save

Any questions.

Mark
 
Last edited:
Thanks for the help Mark, I'm sure there are other people out there trying to figure out how to change from kilometers per hour to miles per hour on the Stromer ST1 and this will help them too :D
 
It would be handy to have a Stromer FAQ or Tips.

E.g.
Sensor sensitivity: code 1004, default 50
This is how hard you have to pedal before the motor assists. A lower numbers require more force on the pedals before the motor assists but will increase range as rider effort is increased.
Personally I've set mine to 20, on a relatively flat ride in ECO 25% of the 14.5ah battery takes me ~25km @ ~25kph ST1 (I'm 230lbs).
 
It would be handy to have a Stromer FAQ or Tips.

E.g.
Sensor sensitivity: code 1004, default 50
This is how hard you have to pedal before the motor assists. A lower numbers require more force on the pedals before the motor assists but will increase range as rider effort is increased.
Personally I've set mine to 20, on a relatively flat ride in ECO 25% of the 14.5ah battery takes me ~25km @ ~25kph ST1 (I'm 230lbs).
Here's another thread by Chandlee that includes PDF guides from Stromer on torque sensor adjustment that could be useful.
 
Yes...let me see if I can find the documentation. Ther is a separate sheet w/ the instructions for just this one feature change... Be right back

Mark

Hold power and + for 3 sec brings up code0000 set it 0003 this returns 0 or 1

0=kph
1=mph
Hold power for 3 sec to save

Any questions.

Mark
Thanks - couldn't find info anywhere
 
Back