Reprogram Voltbike Yukon 750 controller

[satsteve]

Hi there, I'm new here, but I've been on the Yukon 750 forum for about a year.

I'm looking to see if anybody here has successfully reprogrammed the PAS levels on the Lishui controller for this bike. There's been a lot of talk on the FB group about doing just that, but I have not seen anybody post results.

I've seen the Lishui programmer manual with the USB FPS2 stick & associated cable kit; but there is no mention of how to obtain the kit. They also have software & drivers to download. Looking through the forums here I've seen a few threads, but I didn't see anybody post results.

My ultimate goal is to lower the PAS 1 power/speed. As delivered PAS 1 goes to 15 kph, I would like to lower it to around 7 kph.

Please post a link if this topic has already been addressed/resolved.

Thanks.
Steve

 

[satsteve]

ok, I just around on YouTube, and it doesn't look like VoltBike controller is programmable. It doesn't have USB port or anything.

Hi, thanks for that. Yes that solution is well known.

It's possible to unplug the display cable & attach a laptop with a USB interface. The controller manufacturer (Lishui) shows that on their website. I'm looking for someone that has done that with success.

Thanks.
Steve