Level 2, how can I raise my handle bars 2-3 inches?

riplipper

riplipper

Member
Region
USA
What have others done and how did you do it.
I will probably have to lengthen my front break cable as well.
And, while I am at it, the grips......has anyone replaced them with something more comfortable.
thanks.
 
riplipper said:
What have others done and how did you do it.
I will probably have to lengthen my front break cable as well.
And, while I am at it, the grips......has anyone replaced them with something more comfortable.
thanks.
Click to expand...

I bought new handlebars and grips and am in the same boat. I was going to buy a Redshift stem but will have to remount the front light on Level 2, so I am holding off. Will probably change the bars and grips this weekend. Let me know if you try Foofs stem riser idea...
 
Thanks for the replies guys.
Yeah, I like the adjustable, but I think I would rather not have to move the headlight if I don't have to.
I am assuming our stock stem is 1/1/8" diameter???
And did you guys have to get a longer front brake cable?
Thanks again.
 
riplipper said:
Thanks for the replies guys.
Yeah, I like the adjustable, but I think I would rather not have to move the headlight if I don't have to.
I am assuming our stock stem is 1/1/8" diameter???
And did you guys have to get a longer front brake cable?
Thanks again.
Click to expand...
I'm going to add new handlebars with more sweep and a little raised and hope my cables are long enough. I also bought new grips. The stock grips look nice but are not super comfortable when cruising more than a few blocks...
 
riplipper said:
What have others done and how did you do it.
I will probably have to lengthen my front break cable as well.
And, while I am at it, the grips......has anyone replaced them with something more comfortable.
thanks.
Click to expand...
You can get one of this type of handlebar adjustment stems, allows to to adjust the angle and sweep back you want.
Amazon.com
 
Nvreloader said:
You can get one of this type of handlebar adjustment stems, allows to to adjust the angle and sweep back you want.
Amazon.com
Click to expand...
I've seen those. I have added Redshift stems to a few bikes. Level 2's stem includes the mount for the headlight. If you change out the stem you need to relocate the light...
 

Attachments

  • Level stem.jpg
    Level stem.jpg
    156.5 KB · Views: 293
Taylor57 said:
I'm going to add new handlebars with more sweep and a little raised and hope my cables are long enough. I also bought new grips. The stock grips look nice but are not super comfortable when cruising more than a few blocks...
Click to expand...
What grips did you end up getting. I am thinking of these from cycling deal
1698411666349.png
 
Just received my Lerway post extender and will not work without getting a longer brake cable.
Nothing is ever easy. 🤪
 
@riplipper, With inline barrel adjusters you don't need all new housings. Just add six inches to each side and run longer cable inside. Easy.
 
riplipper said:
What grips did you end up getting. I am thinking of these from cycling deal
View attachment 165452
Click to expand...
www.phat-ego.com

SAPLIZE HANDLEBAR GRIPS

Classical Anti-slip Pattern,High Quality Hard Plastic Core With Medium Soft TPE Wrap. 💡Tips: Don't tighten the SCREWS with too much strength. Please contact us for replacement if the screws went broken during installation. Ergonomic Design, Good Wrist Support, Anti Slip and Shock Absorb...
www.phat-ego.com www.phat-ego.com

I got these in all black.
 
Oh, in that case the easiest way is to buy pre-bled levers and calipers of the correct length. They will need to be externally routed. They are not all that expensive and it makes for much less labor.
 
PedalUma said:
Oh, in that case the easiest way is to buy pre-bled levers and calipers of the correct length. They will need to be externally routed. They are not all that expensive and it makes for much less labor.
Click to expand...
I just looked at my Level 2 and the front brake is not internally routed, just wrapped up with the binding tape the ebike builders use and looks pretty easy to change out. The rear brake on the other hand, is internally routed and might be more challenging of a fix. I would consider replacing my front brake as it is still real noisy when I apply a good stop. I have tried several times to bed the front brakes but it's still super loud.
 

Attachments

  • Front .jpg
    Front .jpg
    273 KB · Views: 189
  • Rear.jpg
    Rear.jpg
    227.4 KB · Views: 201
For the front, how about cleaning the rotor with acetone and isopropyl, and using multi-metallic pads?
 
Pour some right between the pads and wipe the rotors. And work them rolling the bike. I expect a lot of black gunk will come off onto a paper towel.
 
I ended up buying longer brake line and a flush kit for about 25 bucks amazon. Little work but now the Lerway extender gave me about 3.5 inch rise.
 
You must log in or register to reply here.

Similar threads

W
I have a Level 2 coming from my LBS...
Replies
1
Views
824
Ender
Ender
Brockrock
First a Level, and now a Level 2
Replies
10
Views
2K
Brockrock
Brockrock
Douglas Ruby
Vado SL and Vado SL 2 assist levels
2
Replies
20
Views
1K
Jeremy McCreary
Jeremy McCreary
Mike N.
Velotric Discover 2 cadence sensor
Replies
0
Views
343
Mike N.
Mike N.
jomurphy
Engwe Engine Pro V1 - removing and replacing the rear wheel for an inner tube change; total noob and looking for guidance
Replies
0
Views
123
jomurphy
jomurphy
Back