This is a big step forward 
ebikes.ca
Quote from Grin Technologies, "In principle the Frankenrunner can be configured to use certain conventional ebike displays instead of the Cycle Analyst. In particular displays using the KM5s protocol (originally from King Meter) seem to be mostly well-behaved. This configuration also requires the Pedal cadence or torque sensor to plug into the Frankenrunner directly via the 6 pin HiGo connector, with all the PAS and torque control settings and assist levels configured within the controller's setting framework."
Frankenrunner - Grin Products - Product Info
The Frankenrunner is another field oriented motor controller collaboration with ASI based on their more powerful BAC855 capable of up to 72V operation. It is produced as a stopgap controller in between the availability of the V3 and V4 Phaserunners devices.
ebikes.ca
Quote from Grin Technologies, "In principle the Frankenrunner can be configured to use certain conventional ebike displays instead of the Cycle Analyst. In particular displays using the KM5s protocol (originally from King Meter) seem to be mostly well-behaved. This configuration also requires the Pedal cadence or torque sensor to plug into the Frankenrunner directly via the 6 pin HiGo connector, with all the PAS and torque control settings and assist levels configured within the controller's setting framework."
