Frey M600

[Grant McDowell]

Hello.
I have been having some serious problems with my Bafang M600.
Only done 100km +- and the motor slips when pushing force down on the pedal.
Could anyone give advice on what to do. I have tried reaching out to FREY but had no reply. I bought the bike in the US from China and now shipped it back home to Australia.
Having done a little research I think it my be a faulty one way bearing?
Thanks.

 

[AHicks]

One way bearing (clutch) would be where I would start. With that low mileage, you might even luck out and find it just needs to be cleaned and re-lubed? If memory has it right, you need to be careful of the type lube used on that clutch, but I don't remember the specifics.

 

[Grant McDowell]

One way bearing (clutch) would be where I would start. With that low mileage, you might even luck out and find it just needs to be cleaned and re-lubed? If memory has it right, you need to be careful of the type lube used on that clutch, but I don't remember the specifics.

Thank you. I have pulled it apart cleaned and relubbed. Still doing the same thing. Over ordered a new part. We’ll see how that goes.