Antonella
Active Member
- Region
- USA
- City
- New York
I like my bars so maybe Ill get one without the horns. Plus I wanna keep it as original as possible albeit with a modern electric motor on it.
Comfortable and cushy handgrips?
- Thread starter Antonella
- Start date
Antonella
Active Member
- Region
- USA
- City
- New York
I second that emotion!
Merle Nelson
Well-Known Member
- Region
- USA
Yeah, okay to you both. I thought they were the ten speed "dropper?" like handlebars and that they were uncomfortable too. I looked back and see what they are in a pic on the original post. I would like those too.
Guess I was confused.....cause we're still talking.....
I'll stop now.....handled. 
JRA
Well-Known Member
So syringes are more plentiful in your neighborhood than air compressors? Must be a rough hood.
Windex works also as a grip release and install agent.
fooferdoggie
Well-Known Member
alcohol and a lighter. plug one end and blow them off
Handlebars
Well-Known Member
- Region
- Canada
Hey! Stop that!
Antonella
Active Member
- Region
- USA
- City
- New York
No not you, you are welcome to stick around.
Handlebars
Well-Known Member
- Region
- Canada
The best I've found is truck window adhesive foam used as tape over the regular kind of grips the bike has.. Thick and squishy. Makes the grip bigger, too. I use 2 layers. Not for show, but good for hands. I use thin cable ties on the ends to hold it on better. Has worked for 2 years. Of course, I made my everyday ride look like junk as a way of deterring theft, along with heavy chain locks and Ulock and secret motor disabling device (cable tie stuck into brake lever opening).
Last edited:
Rickman1
Active Member
- Region
- USA
- City
- Aridzona
I had problems with my hands going numb after several miles of riding (Cruiser Style). I bought a pair of Ergon GP1 BioKork grips and have been very happy with them since I installed them. Bought a second pair for my other ebike. Nice cushioning and flat area to rest my palms.Looks good too. They have other colors and materials as well.
Last edited:
Antonella
Active Member
- Region
- USA
- City
- New York
I have decided I will never lock my bike up anywhere unless it is indoors in a place that is safe. This is NYC and they have every trick to get through any lock you can have.
Antonella
Active Member
- Region
- USA
- City
- New York
I was looking at that one Rickman. I think that because I have Amazon, I can order two or three to test out and I can return the ones I don't like. And that particular color may go good with my brown bike.
JRA
Well-Known Member
Regarding your title the grips that come to mind are the "Mushroom" style grips. Super cushy and come in colors.
Plus they are era correctish, well at least they were on BMX bikes bitd....looks like you might need to lose a few links out of that chain? Does the chain mesh correctly with the rear cog? What's your plan for the display which is large and ugly but necessary for the TS to operate? I like how the tire is pre-flatted it will give you good practice on fixing flats as you will probably be getting your fair share of them with those wheels and the streets of Hells Kitchen. Or maybe they just need air...have fun with it and good luck. Don't forget to post the after picture.
Plus they are era correctish, well at least they were on BMX bikes bitd....looks like you might need to lose a few links out of that chain? Does the chain mesh correctly with the rear cog? What's your plan for the display which is large and ugly but necessary for the TS to operate? I like how the tire is pre-flatted it will give you good practice on fixing flats as you will probably be getting your fair share of them with those wheels and the streets of Hells Kitchen. Or maybe they just need air...have fun with it and good luck. Don't forget to post the after picture.
Handlebars
Well-Known Member
- Region
- Canada
Or you could get a padded steering wheel
Antonella
Active Member
- Region
- USA
- City
- New York
The chain is original to the bike, it is too long for the motor because the new chainring has fewer teeth. I'm going to buy a stronger chain designed for ebikes.
I have an 860C display from Eco Cycles.
It's big but I think it looks okay.
The tires are old Schwalbe Delta Cruisers. I did install those Mr. Tuffy "puncture proof" liners. I bought new tires and installed them in my other Raleigh to use as an ebike but decided not to use that bike due to the bent fork.
I finally found out the name of those upright handle bars. They are called "North Road" handlebars.
Last edited:
Antonella
Active Member
- Region
- USA
- City
- New York
If it doesn't have an airbag installed I am not interested.
Antonella
Active Member
- Region
- USA
- City
- New York
JRA
Well-Known Member
Ok good decision to use Eco-Cycles for your supplier they are my go to for TSDZ2 supply also. That display is much less obtrusive and gives way more to look at info wise also. To the point of distraction though while you are riding so be warned!
Although the TS motor is not a huge powerhouse it will still put forces on the chain over and above normal use levels especially in conjunction with human effort on the cranks. That Sturmey Archer 3spd hub is a fragile item that you should treat with care or it will self destruct...while I am not against throttles as some are I wouldn't recommend using one on your bike, the torque assist should be fine for your needs if you choose your shift points wisely.
I see what you are trying to achieve though as a retro mod and think it is a worthy enterprise.
Although the TS motor is not a huge powerhouse it will still put forces on the chain over and above normal use levels especially in conjunction with human effort on the cranks. That Sturmey Archer 3spd hub is a fragile item that you should treat with care or it will self destruct...while I am not against throttles as some are I wouldn't recommend using one on your bike, the torque assist should be fine for your needs if you choose your shift points wisely.
I see what you are trying to achieve though as a retro mod and think it is a worthy enterprise.
Antonella
Active Member
- Region
- USA
- City
- New York
Yes, I read good reviews about them and they have answered allot of my questions. The price was pretty good too as I got an additional discount with purchase on the Black Friday Sale. Sure beats China.
I am concerned about the SA 3 speed hub but I have some backups.
I am putting a throttle on it and I read somewhere that the power is reduced when using the throttle.
Thank you for the encouragement. It is certainly an experiment an exciting to see how it works. If it is a failure and I dont die on it, I can always choose a more modern bike.
JRA
Well-Known Member
Except for the fact that it was made there....it is smart of them to get good product and provide a consitent service. Black Friday deals are a thing now too. Got my new bike on one myself!
I really think that if you baby it and don't be jerky with the throttle or try and pedal in too hard a gear while using the throttle you should be ok. I don't think you will be racing the thing so take your time.
Yes and no dependent on how the programming of the OSF is set. The OSF one I got the throttle is pretty soft start but also pretty worthless at speeds over 5mph. But I mainly only pedal after using a throttle for a bit of momentum and let the PAS take over. Pretty adjustable via the modes of assist and the touque sensor actually works well.
Like I said retro modding is a valid concept. I have my eye on a set of NOS Schwinn balloon, mens and ladies, bikes out here that would be so cool with a little front hub motor and a battery fit into their fake gas tanks. I'd probably spec a disc brake model though and figure out some way for it to work to be able to stop the thing. The old New Departure hubs they have are the originator of the name "Repack". I guess what I mean is don't be afraid to improvise more on a modern slant if needed. Brakes for instance?
Similar threads
