Clear data
Press and hold the Plus button and the Minus button at the same time for 1 second to display the temporary data to delete. The erased data includes the maximum speed (MAX SPEED), average speed (AVG
SPEED), single mileage (TRIP) and driving time (TIME).
* The above data is not cleared when the display is turned off or the
electric bicycle is turned off.
3. MENU parameter setting
When the device is on, press the Mode button twice (<0.3 seconds between
press), the system enters the parameter setting status. In this state, the
meter parameters are set. Press the mode button twice again to enter the setting status
leave. (<0.3 seconds between presses).
In the setting status, press the Mode button to select the desired adjustment item, when the
parameter flashes, press the Plus button and the Minus button to adjust the parameter setting, press
Press the Power button to save and switch and press the Mode button twice to enter the
setting state (<0.3 seconds between presses).
* If no key operation is performed for 30 seconds in the parameter setting status,
the meter will automatically exit the setting status. In drive mode (the speed display is not 0), you can
not open the settings interface. When you start cycling in the settings interface (the
speed indicator is not 0), exit the setting automatically
