display

[KellyB]

at power up the display briefly shows what gear the bike is before the display is turned on. my bike is in first gear but the control indicates its in second.

 

[KellyB]

so after messing with the cable tension and derailure adjustment its all better.

 

[JackA]

Good job diagnosing the problem. I try to always end my rides in 1st gear so as to be in 1st when I next ride. Also remember that the bike should be stationary when you start up the electronic system so that the speed and gear setting can be detected (Speed = 0 and Gear = X). I used to start the electronics "on the go" after riding for a while and would get very inconsistent assist performance.