20A controller, 52V battery and LCD Advanced Matrix Display questions?

[AlRay]

Questions re: 48V 19.2A CrossCurrent S and a 52V 19.2A RipCurrentS.

Is the LCD Advanced Matrix display used on the 48V CrossCurrent S identical to the
LCD Advanced Matrix Display on the 52V RipCurrent S? If not, what is the difference?
Will the 52V battery pack from the RipCurrent S work properly with the 20A controller on the CrossCurrent S?
Could this cause an overheating problem?
Thank you for any help here.
Art

 

[AlRay]

Thank you Timpo.
So I can switch the 52V battery from my RipCurrent S to the CrossCurrent S with no downside?
Could this cause any damage (ie: overheating) to the 20A controller on the CrossCurrent S? Void warranty?

 

[AlRay]

Thank you again Timpo.
I have the 48V 19.2A large battery on the CCS so it is identical in size to the 52V on my RCS. I use a GRIN Satiator to charge the batteries.
Would you have any idea why Tora went to the 25A controller on the CCX?
I have heard the 650W Bfang motor on the CCS is the same as the 750W Bfang motor on the CCX. Not too sure about that!
Perhaps more juice (52V) and a larger (25A) controller gets you more jam

Spec page:

CCX Standard Configuration (from Juiced website)

• 750 W Bafang Geared Hub Motor
• 52V / 19.2 Ah Extended Range Battery
• LCD Advanced Matrix Display
• 25 Amp Peak Controller

 

[AlRay]

Thanks Timpo. Good explanation.