controller

This is Steven from Suzhou Tongsheng Bicycles, China. Specialized in controller, brake, display and motor system-both mid motor and hub motor, with over 20 years, located in Jiangsu province, China. Have two office in Europe, and will have one office in USA in future, provide good service to...

I had the fun of upgrading my Daymak Beast Ultimate this summer. While I made a number of changes, the biggest upgrade was the installation of the new Bluetooth Controller that Daymak sells (model #DMK1802LED). The process was complicated by the lack of information on how the controller was to...

This has happened more than three times so far: I'm off the bike and holding the bars and it suddenly goes full throttle! The first time it happened I just assumed I accidentally hit the throttle, but when it happened again I realized it was doing it on its own. I'm getting used to always...

This is my problem........ Everything was working great......parked the bike outside for a couple of weeks, brought it in to charge. However, after having been charged, I took it out for a spin and almost immediately the motor cut power.......only to be restored several seconds later.....which...

Hi there. Does somebody recongnize the brand and model of this controller? See photo attached Thanks!!

With more than 5200 miles in 304+ hours of use, and about 300 recharge cycles, My EG Zurich has performed flawlessly until lately. Now it seems to markedly lose power and sometimes shuts down when pedaling in headwinds and up mild grades. During higher power demand times the handlebar console...

On my first day of vacation in NC Outer Banks, I got caught by a the rements of a wave washing up while riding along the brim. All seemed okay till an hour later after the bike sat a little. I now get a code #30 on the display and the word maintain. The power/PAS Level/controller shuts down...

Hi, So I got a bicycle wheel with hub motor and a controller from china (along with other required parts like the throttle). I hooked everything up together and it was working nicely. However, yesterday I plugged in the connectors from battery while the ignition switch connected to the...

Installed the 20amp plug in Passion eBike controller for the Sonders from AliExpress. The unit is a bit bigger and ended up mounting sideways with a plate and velcro. Everything seems to be ok until you take it for a ride. The throttle gets stuck at full on and stays that way until you hit the...