Search results

I dug deep and it appears that the Rodi Blackrock, 6-bolt, sealed bearings, ERTO 622 x 23, Hub formula DC32 9 X 100 QR is an ideal wheel for my heavy Gepida ebike. The rim is slightly wider than the stock 19C, but my Schwalbe 40mm tires, 28 X 1.5 will fit just fine and the slightly wider rim...

Thanks! Several questions: The Cordo wheel size on Holland Bike Shop is 23-622, and the Rodi wheel on the bike says it is 622-19C. The Hybrid Cordo is: Rim material: Aluminum Spoke; material: Stainless steel. Is this going to be heavier, but stronger? This wheel has 32 spokes, some have 36. Can...

Does this answer what type of hub interface it is? I don't know what type it is. BTW do you have suggestions for cleaning this? It's filthy because it's hard to get in there.

The bearings in my front wheel are worn and apparently it's cheaper to replace the entire wheel. The recommended replacement wheel, equivalent to the factory original, is a Rodi Webdisc ETRTO 622 X 19C. This is an aluminum wheel that is inexpensive, about $50 plus shipping. My bike wheel has a...

I took my bike to the shop today, and they found three stress fractures on the rear wheel. The cracks were not deep enough to cause an air leak, but they were obvious to the naked eye. This freaked me out a bit. The wheel is stock from the factory, a Rodi Alloy 6063, 28", 622 X 19C. I have a...

The shop measured my Taya chain with a Park Tools measuring tool. They said it had maybe 5% life left and it needed replaced. The chain has 2,400 km of use, about 1,500 miles. A previous chain, Shimano CN-M6100, lasted 3,245 km. I am not super fastidious about lubrication, but I keep the chain...

For general information: Schwalbe Energizer Plus Tour tires, rear tire getting smooth at 9,720 kilometers. I am electing to replace both front and rear, and will keep the front tire and put it on the back when it is worn out. I bought these tires three years ago, July 2021, for about €56 for...

I believe the chain that was just replaced was a CN-M6100 Shimano. Just for the record it lasted two years and almost exactly 3,000 KM. Not sure what average mileage is, but seems this is fairly good. I use a couple different types of spray lubricants, and the bike has heavy use going up...

The old rotors were only designed to be used with resin pads. The upgraded rotors accept semi-metallic. Thanks for the reply, this tells me it's normal and I might get another 2,000 KM out of the front pads. It just felt odd after having to change them so frequently, and when I look at the pads...

About 4,000 KM ago I changed the changed and upgraded the brake rotors with a set of Shimano SM-RT66, replacing the original Shimano SM-RT56S rotors. Since the new rotors, the front brakes have not been changed, and the rear brakes have 1,200 KM on them. Today the shop looked at them and said...

Thanks! Great info. A couple questions: Where can I find the part number for the Shimano/Deore calipers on this bike? It's a 2017 Gepida Alboin 1000 SLX 10, 10 speed trekking bike. This bike has over 14,000 km on it. Is it wise to do preventive maintenance and change brake components, or do...

I'm exploring options with new levers right now. I ran my bike into a concrete abutment, slow speed, but it totally scraped up the brake lever and put some nasty gouges into the main body of the brake assembly that the lever bolts onto. Also, with new handle grips, the levers that are on there...

Wonderful people, safe and relaxed, and beauty amidst decay and renewal. Loved Philosopher's Hill, loved the stunning buildings seen from the river. The place really left an impression on me. The public transportation is second to none. The opera house there is overwhelmingly beautiful.

Way cool. It's on the Buda side of the Danube. Stopped in and got some new handle bar grips. The price was 9290 Hungarian Forint which worked out to $26. Looking forward to trying these out. So cool to get actual Gepida labeling on the lock rings. Loved seeing all of the Gepida bikes including...

I just replaced a BOSCH 400wh PowerPack frame mount with a 500wh. I also have the Intuvia display. Works fine, the Bosch site says they're interchangeable. The new battery does give more range and there seems to be more power, though I think the old 400wh battery was getting weak towards the end.

It looks like I have to replace my Bosch 500 w power pack. The current price in Europe is € 619. The battery has lasted 6 years, and 12,800 km, with almost daily riding. I guess that isn't too bad. I'll know tomorrow if for sure the battery is kaput.

My Bosch Intuvia display had an error message, "Error 640" which means Internal battery pack error. Restart the system. If the problem persists, contact your Bosch eBike dealer. SPECS: 2017 Gepida Alboin with 12,650 kilometers Motor: BOSCH Performance Line Battery: BOSCH 500w PowerPack...

On my 2017 Gepida Alboin 1000 SLX 10 the original chain and gear cassette were replaced at 4472 kilometers The specs say the original equipment was FSA CK-745+CHAINGUARD 18T 170MM The replacement chain and gears were better--never did get square on the make and part numbers. These...

Update--I went to the bike shop and they scrounged up a clamp that works. I never did get the size straight but I think it was a 30mm.. Anyhow, what should have been the simplest of tasks wasn't. There's a number of websites that confidently proclaim that 27.2 post = 28.6 clamp. There is no...

The published specs for my 2018 Gepida Alboin all say the seatpost is 27.2 mm, and this requires a 28.6 clamp. I ordered a clamp (replacing the quick-release) and it is too small. The clamp fits perfectly on the smaller seat post, but I'd have to spread it apart to force it onto the downtube...