Search results

Thank you, Admin....

6Z Same here, counted over 25 posts in 1 gate, reported it and no response from the Admin also, kind'a like the Oops, there been an error posts that are showing up all the time. May be this site is on limited time? I hope not.......

PC I don't know anything about this type of stuff......???

PC My Juggs 4 bike has these spec's for the steering stem = Threadless 1-1/8" - 1-1/2" tapered, I don't know the bottom/top bearing sizes yet. The #1 item is, I don't want to lose the front basket, as this bike has very critical COGL = center of gravity line, as it is. The F basket with the...

Yes, he is missed, it's to bad that all his information can't be accessed now, tried several times to get access and no replies back from from Dani or those in change. Thanks Matt, RIP.

PC Thanks I have an email into Bikirix to get that information, and then I can start looking at the proper fork change.

PC Thanks for the photo's, A rough measurement from my bike, I would need approximately a 9-10" long steering tube length. The frame is 7"+ in height, with the excess of the steering tube above the frame. One item, I did NOT think about is. I will lose my front basket if I go this way, using a...

Ah PC, When I went to school in the very early 60's, 135mm from 150mm was 15mm/.590" difference, divided by 2 = 7.5mm/.283" + or - approximately. How did you come up with 12.5mm per side? The brake side will be less than the non brake side...at least from my quick measurements, to keep the...

PC What is the length from the top of the double shoulder to the start of the bottom of the inverted leg? I need between 12 to 24", for proper mounting of the 2 brackets... I have found out that I can change a 135mm QR hub to a 150mm spacing, with a solid axle. Still reading...

I'll wait for his replies.....

What does that frowning face mean?

Can Nik, Are you saying YOU can't legally carry a long gun on your bicycle, in the UK?

PC I can't use a standard fork, the clamps need to go where the standard fork has it's compression stroke/area's. On an inverted fork, I can clamp any where from the top down to 12>16" down the fork, there is NO movement of the fork legs in the top section. I am still pencil whipping this...

Look at the line running BEHIND the tire/rim!!! Top of the photo... and a couple of spokes also... The reason I wanted to find a new fork, was because I can clamp a couple of soft gun rack clamps to the fork leg for carrying my air rifles, small game season is almost here in Oct, etc. I can't...

Thanks Chazmo, Found lots of them, but only for 150mm solid axle, the 135mm QR for the Juggs 4 seems to be hiding somewhere, but I got "Chance" and "Sage" hunti'n them...lol From my limited experience dealing with E bikes, I'll probably have to change out the front tire to a 135mm solid axle...

Thanks Guys Spent several hours looking for a inverted 100mm suspension and Quick release bottom, for use with a 4" tire, kind'a like hen's teeth, that can't be found, so far. I got solid axle comin out my ears. Still hunti'n for less 3 bills or less, found several that were 8 bills plus...

Now, here is the way to travel with your E bikes, and land just about anywhere that's suitable and safe, then ride off on the bikes... https://www.cycleworld.com/story/motorcycle-news/mike-patey-bush-plane-scrappy-carries-two-dirt-bikes-under-wings/ After spending over 7000+ hrs in a Super Cub...

Guys, I am attempting to mount a long gun carrying rack (gun case) to the front forks of both my E bikes, the Wart Hog bike poses no problems, BUT, the Juggs 4 bike won't work because the way the front fork operates/compresses. In simple terms, the WH forks compress at the bottom, with the...

As I have found out, you can quickly get in over your head, if you don't preplan ahead, not enough juice for the trip home. I go farther than I planned, and that leads too TIRED old bones, sometimes.... lol

The last time I was there, was 1969, back from VN, grew up to the south of Crater Lake in K Falls, I got to take the family there, we, G Ma and G Pa, all the grand kids went there several times a yr. We had to find the "OLD MAN" in the crater, before G Pa could find it. I doubt that he is...