Search results

interesting write up for these tpu tubes https://www.cyclingweekly.com/products/can-you-trust-tpu-tubes-in-a-pinch-what-to-know-about-cyclings-newest-tube-type-a-deep-dive-on-a-thorny-topic

recently got a Tatonka hip/bar pack. fits underneath the frontlight and is easy to carry on and of the bike. Fits a lot off stuff you would want to take with you.

Btw, did you check if the creaking is indeed coming from the drive train? Like in another thread, did you check for the creaking sounds when you are out of the saddle with force on the pedals and what happens when you just barely touch the handlebar? Could also coming from a lot of other places...

The chainring can either be one piece or on a spider like above, like with other brands this assembly is over a splined shaft and the locknut is a left threaded nut, for Yamaha just a regular nut where oither brands prefer to use their own nut for which you would need a special tool. Did you...

Or ride faster than the speed limit of the e-bike ;D also no noise and more training effect.

This is what i get as a readout from the rox4 Ride full against the wind

depending on the type of lockring you would need a left torque wrench, a 36mm (thinwall) socket and set the torque at 25Nm for the Alu and 35Nm for the steel locknut.

New recall on the Giant Vida E+ https://www.cpsc.gov/Recalls/2025/Giant-Bicycle-Recalls-Momentum-Vida-E-E-Bikes-Due-to-Crash-Hazard

our bikes are equipped with the S216800009 TURBO CONNECT UNIT DISPLAY (TCU) The data fields are available with the S216800020 MASTERMIND TURBO CONNECT UNIT DISPLAY besides that, with are "traditional" touring bikes (like in camping trips with panniers) we do carry bike computers, mine is in...

btw, those are great to get a crown race of a fork crown https://www.trailerandtools.nl/Universeel-trekker-set-30-tot-50mm-Lagertrekkers-SATRA for example PT has a tool which is way overpriced

https://uniortools.com/eng/product/360-6B-tube-cutter some bike-tool companies have them in their offering. I do have a few of m, works fine on handlebars and steel steerer tubes. For Carbon we use a saw and guide.

https://www.winora.com/nl-en/p/yucatan-r8f-wyan1/ https://doctibike.com/nl/fietsaccu-yamaha/4591-xlc-range-extender-yamaha-360-wh-voor-haibike-en-winora-motoren-yamaha-4055149510473.html This could be something to look into. Belt, Yamaha, 27.5"

New handle bar and grips for the SL's. After a lot of km we came to conclusion that 16 degrees and Ergon grips fitted our needs better for our fit. Happy with this fit.

https://en.m.wikipedia.org/wiki/The_Indian_Water_Lilies 😉

Replace inner and outer cables and open up the shifters Ok video hoe to work on those shifters

https://www.volabike.com/en/specialized/33-kit-extender-para-specialized-turbo-levo-sl-kenevo-sl-creo-sl-y-vado-sl-bag.html#/31-logo_color-yellow/38-capacity-240wh/65-version_de_motor-motor_sl_11 vola bike has a 480wh RE for this system

Both the Lupine and the Luminite are available as a seatpost mounted version, so those could could be mounted below the saddle bag

I'd say Lupine C14 light, or the new luminite. I do think you would need to make your owm backet if you wanted it to be mounted underneath the saddle or use a plastic bridge to clamp it onto the saddle rails B&M EAN 4006021010550

the EN norm for this type of bikes states

depends on the model. for the ones without a locking ring, we used to use hairfixationspray to put them onto the handle bars and when this is dried it will lock on the grip. In the case you would need to take them off, spray discbrakecleaner underneath the grips and use a compressor to shoot...