Search results

So I tried setting the cadence in my Enviolo app from 80rpm to 70rpm on the ride home today. There was no discernable difference in bike speeds. Then when I got home, I opened the Enviolo app again, and it had been reset to 80rpm! There is no "save" function in the app, so either the app or...

Do you have to manually set the cadence through the Enviolo app every time you restart the bike? I was able to reduce the cadence, but the setting resets when I power off the bike, and the Enviolo returns to the default cadence setting (80 rpm). If you don't have to reset, how do you save the...

I'll chime in since I've installed a PearTune and can finally get up to 45 kmh (28 mph). To get to that speed, I need a cadence of about 95-100 rpm. This usually happens going downhill.

It just occurred to me that I could probably seal up the tiny holes in the wires using a hot glue gun. If I have any check radar errors in the rain going forward, I may open it up and give that a shot before replacing the wiring harness. Edit: my brother who is a mechanic said to just put...

So I opened up the motor housing today in order to put some shrink tubing over the large connectors, since I didn't have the appropriate size when I first installed. While doing so, I noticed that two of the wires (blue and red) from the original bike connector had been squished, creating a...

Good point. Though I'm getting a radar error versus a motor error, so I guess there is a chance it could still be a different issue. At any rate, I'm going to apply heat shrink tube to the larger connector that I wasn't able to cover during the initial install :) The two this happened to me...

Do you mean it doesn't get wet in the motor housing? I'm pretty sure it can get wet in there - both my LBS as well as PearTune have told me this. :)

I've recently installed the PearTune MSO Tuning e-bike Specialized 2.0E/2.1/2.2 (https://www.pear-control.com/peartune-mso-tuning-elektrokola-specialized-2-1-2-2) on my 2022 Turbo Vado 5.0 IGH, and wanted to share some information about my experience that I hope will help others who install this...

On the 2022 Vado, the PearTune is actually in the motor housing (we don't have any controller on the top tube, it's just the mastermind TCU mounted on the handlebars). :)

Yes, this is a possibility. It was raining both times this happened. It wasn't raining today, and I didn't get an error today. All of the PearTune connections are within the motor housing. There are only two connections that aren't present in the stock Specialized design. These two...

Interesting, thanks!

Does your motor stop working for a few seconds when that happens?

Hi, I've recently received two "radar error check app" errors on my 2022 Vado 5.0 IGH. This happened yesterday and today on my commute to work. It was raining both days, but I live in Vancouver and it rains frequently, and this is the first time I have received the error. (Actually, it may...

I am not sure! But I did set the chip to automatically start when the bike starts, so hopefully that will have the same effect as Always On.

On my bike, I do not have a dedicated walk button. Instead, the + is the walk mode button. So perhaps the PearTune works a bit differently on my bike? I know that entering the chip service menu is different on my bike than others... For example, my bike definitely works differently than shown...

Oh, interesting! I had only tried it while stopped. I'll give that a try on the ride home today. I assume this only works when you're in Turbo mode then? (otherwise, + would just change your assist level).

Hi, thanks again for your advice. I commuted into work this morning, and just wanted to follow up. So when I first started up my bike this morning, I couldn't get the walk button to do anything except to change the assist level, and start the bike in walk mode. So, I pressed the light button...

So I rode the bike into work today. I still couldn't figure out how to enable/disable the PearTune, but I did press the light button, and then +/- 10 times, and confirmed that my maximum speed was set to 45 kmh. As soon as I got onto a section with a longish stretch (no stops or turns), I...

Thanks for your quick reply! I did press the walk button for 1 second, and it just kept saying 0. But after playing around with it for about 30 minutes, and watching their YouTube video, I found out that I can press F1 (the top button that controls the light), and then I can press +-+-+-+-+-...

Hi, I've now installed the peartune, but cannot figure out how to activate it! Could you tell me what buttons you press to do this? Thanks!