Search results

OK thanks, I will try that asap. I have the settings to close the Eggrider after 2 hours. After it shuts off, when I turn it back on the PAS level reverts to 0 and does not acknowledge or control the other levels with the up/down buttons. It is stuck a 0 PAS until I open the app and re-read and...

Thanks again Smorg. Your settings worked and now there's full throttle power in all 9 PAS levels. There seems to be something else going on with torque settings though. I can read and write the torque values but there is no "saving" confirmation on the Eggrider after writing. I do get a message...

Thanks for that info. The Eggrider app looks different but I currently have the same settings and only get full throttle power in PAS 9.

I started programming the Bafang Ultra 510/620 with the Eggrider V2. I want the throttle to give full power in every pas level but I don't know how to accomplish that. Right now the throttle power increases with each pas level so there is full power only at pas level 9. Is there a program...

As a follow up.... I bought an Eggrider V2 from Luna Cycles to program the Ultra motor and it works great, although it is small as a display. The Eggrider has a torque tab that allows tuning torque values too, and it makes programming changes easy on the fly with the Eggrider app. I went back to...

Adrian at Eggrider confirmed that the Eggrider V2 does in fact allow programming the G510/M620 torque settings! This is his email reply to my question: Hi, Thank you for your message. Yes, you can adjust the torque settings! If you need further assistance don't hesitate to contact us again...

Thanks Smorg. Can you explain the Throttle tab settings? If you already did so, I must have missed it.

When adding a fork stem extender... remember the taller it is, the shorter the arm reach. To compensate you can use a longer bar stem especially with flat bars that don't have much adjustment.

Thank you Smorg for all the info you've given us about tuning these motors. Keep up the good work! I don't see a thread discussing the throttle page setting though, that would be helpful. I Think your advice about using the Eggrider only for programming is a good idea and better than using a...

The stem extenders work really well and don't look as goofy as high rise bars imo. The catch is you have to tighten the bolts very tight onto the stem to keep the bars from twisting under load. I found that a dab of anti-seize on the bolt threads will allow you to get the bolts very tight...

The Eggrider manual is unclear about torque settings and their associated links don't work. Does anyone know if the Eggrider V2 allows adjustments to torque settings of the Bafang M620/G510 1000w motors? Luna Cycle says the Eggrider V2 will only work for Basic, Pedal, and Throttle settings and I...

Yes thanks, all is well and the bike has been great so far! That's another reason I wonder why nobody has been commenting on the Specter S. For a bike that has been out for over 2 years there's just not much user data.

I wrote about my Specter S on EBR back in January, simply because of the lack of information out there. It's now March but there's still no new reviews, YouTube videos, or user experiences about the 2023 Specter S that I can find. Eunorau, as of today, still has some photos on their website of...

Still watching for a current review. The 2023 model has been out for months.... crickets!

What I did is similar to other mods seen here but with better placement for center of gravity. I put a 20ah triangle battery on my Rad Rover 5 and used a Topeak Uni Super Tourist DX rear rack to carry the oem battery. That rack is very adjustable to position it far forward and very low to the...

I just searched and still no new reviews!

I just searched and there's still no new reviews!

I had to wait 4 months for my Specter S to arrive but that was due to the cargo ships sitting idle off the CA coast. I'm not saying it's the best choice out there but I've been happy with the bike with almost 1000 off road miles on it. I wrote something about my bike yesterday on the EBR Eunorau...

I have almost 1000 miles on my Specter S and wanted to share some thoughts and mods I made to the bike. The bike is nice as it comes but I did some things to make it even better. The first thing I had to do was add a stem extender to make the bike more comfortable because it comes with a very...