Search results

  1. F

    Thoughts on Cafe Lock removal?

    Love cafe locks. Just got an Abus cafe lock delivered (and it looks like it'll fit- saw different dimensions depending on site) and my old AXA chain fits!!!! Some models offer non-retained key vs retained key. I prefer retained key so I don't have to search for the key and will be prompted to...
  2. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    I'll look for drain holes but I'm not confident to make a hole in the frame especially after accidentally sawing part of the bb frame off. There are no open holes in the frame to let water in- no internal cabling. Would I still need drain holes if the frame has no holes to let water in?
  3. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Update- I used hacksaw to remove the cable guide but did some damage to the bb frame 🤬. Note to self- don’t use dull hacksaw in low light at a bad sight angle. I’m ended up taking off some of the frame of the bb. Here is a photo- did I ruin the structural integrity? I’m so mad at myself😩...
  4. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Update- I’ve removed the bottom bracket and have the motor. Tried fitting but it only goes in part way. Original bb screws in and the body of it is slightly narrower than the width of threaded end. The tsdz2b is slightly narrower than the width of original bb threads but is getting stuck...
  5. F

    Tongsheng TSDZ2B 480V 500watt vs 750watt- perceived difference in power/assist?

    Tongsheng TSDZ2B 48V 500Watt vs 750 watt- is there a perceived difference in the power/assist levels between the two? I've read (generally), higher watts provides more torque, power, faster acceleration and can sustain a higher rate of speed for longer before burning the motor out. Does...
  6. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    This donor bike has a 52T chain ring and 11-34 cassette. I weigh about 112-115 lbs depending on the seasonal attire. This bike is for city riding car lite/free living. Not pancake flat but not super hilly either. There are some super hilly places but I will avoid as needed.
  7. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    I ordered the PT crank remover and changed out the handlebars- swept back with a nice rise and 22.5" wide. Feels great. Do I need to consider Q factor- change out pedals to reduce it? I plan to switch pedals to either 155 or 160mm. Should I seek out pedals that specifically reduce q factor...
  8. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Ok. After poking around Park Tools website I better understand your "maybe"... The Short Haul specs BB is FSA cartridge, sealed bearings. Measured BB 73mm length. Per Park Tools site- FSA are threaded. Roughly measured BB 34mm diameter but will remove the cranks for a proper measurement of...
  9. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    I have the donor bike already- Tern Short Haul (same frame w/slightly lower specs of a Quick Haul w/Bosch mid drive) I plan to attach the Tongsheng mid drive onto the Short Haul. The only changes to make is the handlebar and maybe the cranks and stem. The Short Haul is the shortest length...
  10. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    I think I chose 150 mm cranks on my current 20" bike b/c I am short with a 28.5" inseam to make pedaling circles easier for my short legs :) That bike is much faster and more nimble than my Dutch bike was. The Dutch bike, which I absolutely adored, was just too large of a bike for me (w/170mm...
  11. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Thank you. I will go for the Parks crank puller and bottom bracket removal tool. The torque wrench...first I'll see if a mechanic friend might have one to lend;) and if I really need to buy it, will work the overtime for it. I am willing to buy quality when needed.
  12. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Please forgive my ignorance but is the bottom bracket socket the same as bottom bracket tool or bottom bracket remover? Can you link or recommend a specific bottom bracket socket? I will check my local Harbor Freight for an extendable breaker bar. 3/8" or 1/2" breaker bar? Also, I took it...
  13. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Thank you! I followed your list and Johnny Nerdout's recommendations (though it was specific for Bafang installation) and am making a list. My plan is for a Tongsheng mid driver conversion on a Tern Short Haul (mostly (I think) Shimano parts). Question: crank puller- Park Tool CCP-22 or...
  14. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    For those that have done conversions- is there a specific bike tool kit you recommend that's reasonably priced? . I have some basic tools- random socket wrenches, bike multi tool, pedal wrench, tire lifters, caliper, basic home tools and solder iron. My list to buy include- crank puller...
  15. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Wow! Where is the throttle? And what size battery is that?
  16. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    What is the cargo motor you installed?
  17. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Thank you! I originally considered getting a ready made 20" ebike but most are fat tired, very heavy and too long (the cargo ones) to fit in my space. I see the changes you made to your wife's bike- I do like shorter cranks as well. Hopefully swapping out the handlebar shortens the reach...
  18. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Great idea to trim it! I like that it's already 31.8mm...
  19. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    Yes, I think swept back handlebars with a bit of lift might be high enough but again, I was just surprised. This is my first bike where the handlebar height is not adjustable. What do you think about folding handlebar stem or stem riser? ThinStem or Satori HeadsUp. They allow the handlebars...
  20. F

    Hello! and I think I want to build my very first ebike(compact cargo)!

    NBD!!! I got the Tern Short Haul, was barely able to stuff it into my car and now the changes must begin!!!!! 1) Handlebar- its a nearly straight mtn bike handlebar and 28" long. Way too wide for me. Hard to find a black 31.8mm clamp diameter swept back handlebar that is around 540mm wide...
Back