Search results

Thanks for the info.

Did you have any belt slippage during the hill climbs? How often did you apply silicone to the belt? Thanks

I would agree. Quite sure the product I used caused the premature failure. The next belt will not get any lube.

Ride1up recommends CRC heavy duty silicone spray. Used a silicone spray called blaster 16 sl industrial strength. Only because I couldn't get the CRC brand. I agree this could have been the issue. The rubber seems to be soft. These are not gates carbon fiber belts. Brand is Top trans. Belt...

Was able to order a replacement from Ride1up. $63.00 with shipping. Should be here Thursday. Thinking the premature break is my fault. Couldn't get the silicone spray they recommended and used another brand. Will stay with the recommended spray going forward. Just an FYI if your belt happens...

Bike has about 2500 miles. I have the Kirkit tool and have maintained the proper tension. Today out for a short spin and the belt came off. I was about 2 miles from home on a bike trail completely flat when the belt came apart. Anyone else have their belt fail? If so how many miles? Just...

Great news. Hope you enjoy your Roadster v2.

That's very odd. The belt set at 45lbs should not be a problem. The specs on the ride1up website say between 45 and 50. Would definitely send the video to ride1up support. Perhaps they can diagnose the problem. Sorry to hear about the issue you are having with your bike. If you find what the...

Some adjustment tips. A bike stand that will hold the bike off the ground is most helpful. You need to turn the crank several rotations after each adjustment to get an accurate reading. Try to take the measurement in the middle between the rear axle and the front crank. Measure from the same...

I also have a Roadster v2. Purchased last January. Same issue with mine. Had a hard time finding the correct tension. Finally purchased a Gates tension tool. I set mine 45 pounds. Seems to have solved the problem. Good luck...

Thanks, Going to the LBS tomorrow. Found an interesting post here on EBR about my same issue. While charging yesterday, the battery started flashing all 5 of the leds while charging and the charger would shut off. Spent a couple of hours debugging this at the LBS today and Bulls is going to...

Cleaned all connection points again. Took side case off unplugged and cleaned two connections. Put the battery back in. Powered up and everything looks right. Went for a ride, all assist levels working. I contacted Bulls and described my issues. They seem to think the battery may have one bad...

They do sell a blue tooth dongle that can be added. Its not a feature that was included on my bike.

Just rode 7.5 miles on highest assist level. Rode up all the hilly streets around me. The battery level dropped one bar showing 4 bars on both battery and display. That would be 35 to 40 miles on the highest assist level. Seems battery still has pretty good capacity. Powered the bike on and off...

Going to try that today. When the bike was new I could get 100 miles with level 2 assist. Going to put it on highest assist level 4 and see how far it will go.

The battery does not charge up. The charging process starts then after a short while the LEDs on the the battery start flashing and the charger shuts off. When I power the bike on the battery indicator in the display flashes indicating zero battery level. Assist levels will not function. Whats...

Thanks for your reply. Perhaps my question should be can I convert my bulls ebike from stock battery to after market battery. Waiting 3 to 4 months for a new battery is the issue for me. If I could have my current battery rebuilt that would be best. It seems a rebuilt battery will not work with...

I did contact battery rebuilders. The one in California said there was something about data and could not be rebuilt. https://www.fthpower.com Unfortunately we are not able to repair batteries with proprietary data system such as Bosch, BionX, Shimano, Yamaha and other similar system. These...

Sorry. It is powered by Brose. It has a Bloks display. Quite sure it is a 2016 model. Thanks for responding.

My Bulls EVO3 29ers battery seems to be at end of life. I purchased the bike almost 5 years ago. Thousands of miles ridden. love this bike. I can order a new battery $1200.00 dollars and will take 3 months to arrive. The battery is 37V 17.4 ah. My question. Would it be possible to purchase a...