Search results

Where are you located? Maybe an existing Das-kit owner would be willing to test swapping a display as a diagnostic tool or maybe even enabling a permanent setting? I imagine a C7 or L7 display would work for this. Just a thought.

That's a bummer. Does anyone think swapping the display would solve this? Or is it a controller function? Maybe the display would just have to be swapped temporarily and this setting reset and the setting would stick with the controller when the initial display is swapped back in? I have never...

If you purchased from Amego, I think you made a good choice. I have nothing against Leon Cycles at all, but speaking for myself, Amego have treated me very well for service and maintenance.

You may want to join the TERA FB group and/or the TERA Meetup group. We did several Toronto-based group rides last year, but the pandemic so far has put a damper on things. We may start some soon again now that things are looking better. In fact any member can set up a ride and see who signs up...

This is why I never use a lock/ignition key, etc,, unless I have at least one spare key at home. If I start with 2 and lose one, I immediately try to get a duplicate.

I assume you've seen this site? https://ebikemarketplace.com/products/prodecotech-e-bike-battery-replacement?variant=7418428194846 Looks like they just build a standard 13s lithium pack in the enclosure and scrap the LiFePO4 pouch cells. Maybe you can find a ready-made shrink wrapped lithium...

Possible, but I have several chargers and some go to 54.6V, some to 54.0, etc. I think it is more likely it is just a manufacturing tolerance issue. It doesn't really matter a whole lot. I seldom charge to full anyways. Only immediately before a long trip or to balance cells once in a while.

And the ones from ebikes.ca are Sapim spokes and they do come in silver. The other option is 13ga/14ga single butted spokes. These are 13ga at the hub and 14ga at the nipple. I have several of these in my rear wheel right now intermingled with the original 13ga straight spokes. To date, I have...

I would be interested in hearing how the new fork works out after you have had a chance to ride with it and also a link to which one it is. I was thinking of upgrading as well.

Yea..a lot of people complain that their bike is not fast enough, but I'm with you -- I like to do some of the work myself. I suspect there may be a way to tone it down, by using some kind of external device, but I don't know enough to advise on that. If you're able to find out what...

Interesting...which motor are they using? I assume it's not the DAS-Kit that is used on the other Magnum bikes.

Mine is a 27.5" Amego Infinite Plus. I believe it is the same rear wheel. The numbers I have found are: Crank Side - 208mm Non-crank side - 209mm In practice 1mm doesn't matter much and I have used the same length on both sides

A minor mod to the process of changing spokes without removing the wheel. Instead of using a magnetic screwdriver to seat the new nipple and not lose it in the double walled rim, I used the old (broken spoke), or another one if you have extras, threaded on the backside of the new nipple to place...

I hope you're not calling me a little old lady!! (LOL)😄😃

Excuse my ignorance...but what is a carbon sticker and where do you get them?

None of these bikes that use the Das-Kit motor and the Reention battery have any "ignition switch". Obviously the battery is physically locked to the frame with a key, but a passerby could theoretically turn on the battery and the controller. If you look at the post below you will note that...

Big thanks to John for his guidance on replacing a spoke without removing the rear wheel. I did it today and seems fine. The only difference I ran into was the nipples I had weren't attracted to a magnet, so the magnetic screwdriver technique was out. However, I managed by just taking care with...

Ditto for me. In Eco mode it feels more like a bicycle and is plenty zippy for me.

I for one would be quite interested in the details as your project(s) progress. I have the L7 display on my Amego Infinite. Especially the power switch and the "wattmeter".

That was my thought exactly when I communicated with Jenny. I can add to that - very professional.