Search results

Since many ebikes have aggressive riding position, I thought the owners may be interested about these options. http://www.bikepacking.com/gear/list-of-comfort-mtb-handlebars/?fbclid=IwAR0HdwKmwJ2Nh7cJ3yCPVsSm23TOBKrvvHw03UM8WV6NlSgViMkPzVOMzj8

No problem, non electric cars have been using fake sounds already, just transfer that thing to electric cars.

That's the 2015 Luna Giant Stance 2 with BBSHD. I just added the fenders, puncture resistant street tires, kickstand, upright handlebars. No lights, just the tank of my air horn in front. Luna cycle replaced it with the newer version now...

Carpet of leaves at Westchester, New York.

It should not be an issue, I think the Speedfire shifter will be fine.

Some people don't know the sequence of tightening and then end up with a loose steerer (I myself fell victim on it). With all installed in position, you have to first tighten the center bolt until there is no slack on the steerer tube. Then tighten the bolts of the stem riser. Once the stem...

You need a stem riser. I think there is only one size/diameter for MTB.

I'm pretty confident, you can use 11-25 cassette, you need to shorten the chain in a way that the lower leg of the derailer is roughly vertical in position at the lowest gear. And then readjust to align the upper and lower limits of the derailer movement. You also need to adjust the "B" gap...

I also consciously made an effort to stand on the pedal (6 o"clock position) and shift my weight to the extended leg periodically, whenever I pause my cadence. I stop pedaling when coasting, slowing down, going over bumps, going through curves (inside leg up), or whenever I feel like wanting to...

This is what I used on my old 24 volt ebike...

Agree, but nobody uses heavy lead acid batteries anymore, these heavy batteries are mainly used by low speed wheelchairs for the disabled people. The components are already obsolete and heavy. It has no pedal assist system, and the brakes are not safe for our present ebike standard.

Below is the C6 version.

Just get a new ebike within your budget range and forego the headache of restoring an antiquated museum piece. The newer ones are lighter, has better disc brakes, has pedal assist system, and more efficient.

Unless you are into a high speed down hill racing, the plus size tires can be set up to just the right tire pressure for a cushy ride. You might also want to get a body float. I used to have a Thud buster LT but it's not as good and tunable as a body float. The rearward travel of the thud buster...

Some may find this to be too technical but there are also few others who want to ponder on the inner workings of the gear reduction mechanism and the gear ratio. I know the BBSHD has 2 stage gear reduction using pinions and gears and has a gear ratio of 21.9:1. The Brose uses planetary gear in...

Picture it like this, the chain ring receives power from your legs and/or the motor. Your legs can pedal without the help of the motor such as in PAS 0. This is made possible by having a free wheel clutch from the motor so it would not be dragged along and produce "cogging" resistance (such as...

If it is a bafang brand, you can reprogram the PAS sensitivity one step lower. That's how I solved mine.

There is another thread that talks about battery state of charge and preserving life of battery. https://electricbikereview.com/forums/threads/how-to-best-charge-battery-for-longest-life.14791/page-8

Check out this old thread. Another Magnum owner asked the same question as you. https://electricbikereview.com/forums/threads/magnum-battery-connector.24616/#post-157521