Search results

So Mike_V makes a good point. My light wiring off the XT60 connector was a very thin 22awg wire to a XT30 connector. My wiring at the XT30 connector did eventually break. I 100% soldered all connections during the install. I ended up cutting the 22awg wire and installing a mini fuse to the...

Well after a few months I finally got the light installed. Had to reorder another harness but was able to get the relay installed which I thought was not going to happen due to the limited space in the downtube. Have to get out on a night ride to really test the setup but really happy with the...

Max the air pressure of the fork to 120psi you will need a shock pump. The fork will have a compression dial on the right side. Click to fully open and then move it back one click at a time toward closed to firm up the suspension. Ride then 1 click toward firm then repeat until you have...

Purchased and installed ShockWiz on the Fox 38 160mm travel ebike rated fork. Went for a 10 mile ride yesterday and was happy with my base setup and the Shockwiz suggestions are below. I selected basic "Playful" tuning style and was very close to my base setup. Since I went with Fox 38 fork and...

The bikes on the rack with straps and 9in Ball Bungee wrapped around the wheel and arm or just get a set of rubber straps. All my bikes have front fenders and my tires all have tread knobs which helps keep the arm in place. I have never had an issue with the arms but adding the extra straps...

After just over a month of riding the PF4 with all the changes and upgrades the bike is a very good trail bike. Paved or sand the bike does both really well. The Bosch Nyon is awesome and gives a lot of ride data. The upgraded fork and rear shock have made a big difference. If we had to do it...

Chain was shortened but no luck. Me and the LBS were unable to get it to stop slipping the chain on the 11-46 cassette. Went back to the stock cassette and chain. 38 tooth is about the max chainring I want to go which is what Luna installs stock. LINKGLIDE 11-Speed will be my next groupset...

I am sitting when hitting the pedal. Nothing that should allow the slip. Throttle and light pedaling does not slip. I have an X1 and the pedal does not slip on that motor.

I did try a 11-46 Zitto cassette but it allowed the chain to skip. We tried like 4 different chains.

I have been debating on changing the derailleur limit screw to stop at 2nd gear and prevent shifting to 1st gear. 1st gear is unusable for my riding. A few climbs I went to downshift and ended up in 1st which did not work for my trail riding. So today I adjusted the derailleur and I will try it...

I have had the X2 for about 2 months and last month the Bafang M600 clutch failed when riding over a techy section of trail and the pedal slipped. I ride in Florida so nothing crazy. The bike Luna X2 has 120 miles on it and is NON Ludi M600 Bafang. I opened a ticket with Luna but wanted to post...

I wanted to share my journey with you while I am trying to add a light to my Luna X2. I have chosen the MagicShine 902S with 3,000 Lumens. MagicShine MJ 902S My goal is to install a light that will pull power from the main battery. What I have started with is a XWST DC/DC Converter Regulator...

I have Luna X1 and now the new X2 ebikes. They both use the same 500 watt Bafang M600 motor. The Powerfly uses the Bosch gen 4 85nm motor. Yes the 500 watt Bafang has more power but I am also 80lb heaver (210 lb) than my wife. When I ride the Powerfly it climbs well enough. If you want a Bafang...

FIDLOCK Twist Bottle mount strapped to the top tube as the Luna has no mounts. The Luna does not have a rear rack option but the Powerfly FS 4 does. The rear rack is on backorder. If you want to see more on the Trek see link. Trek Powerfly 4 & 5 A hardtail version of the Powerfly 4 is also...

I have been riding the Juiced bikes a little less since getting a new Trek Powerfly FS 4 and a Luna X2 ebikes that arrived for Xmas. All of the bikes work very well with the Rocky Mounts Backstage. Here are a few pictures of the Juiced RCS Step Thru and the Luna ebikes on the Kuat. The Luna has...

Problem found

Convert rim to tubeless. Use tubeless ready tires. Get a Stans plug kit. Have an innertube for an emergency. It will take 4 16g CO2 to get about 10 psi in a 26x4 tire. Best solution is prevention. Tubeless will seal most punctures. I use the Endurance Orange sealant.

I have the parts to upgrade the Powerfly FS 4 now. List is below. Bike will go into the LBS for installation this month. I did most of the installs but the items listed in bold are yet to do. Rockshox 35 Gold RL 120mm Fork - Completed Trek front fender (rear fender with rack on backorder) -...

Anyone looking to switch to another rear shock 210x55 the measurements are for Fox shock are 803-03-179 (8x32.39mm) and 803-03-245 (8x16.46mm).

I just got my X2. Holiday delayed the shipping but looks like no damage! I have had an X1 since last April so this is the replacement. On this new X2 Luna has installed a coil spring which I did not expect. Brakes are Hayes Dominion A4. The Galaxy paint is really nice. I already have most of the...