Search results

I have a 2016 Crosscurrent that came with a 7.8ah battery. Despite that battery being small, it has always worked perfectly (and continues to do so). However, I did want a bigger battery for more range. Earlier this year I bought a 17.4ah battery. It worked great for about a month and then just...

I'm assuming it's just the sound of the brake. Try turning off the bike before you brake next time to see if you still hear it.

The original CC does have HD-E715 brakes.

I've had 6 rear spokes break in the 1 year of owning the Crosscurrent. The first couple of times I took it into the shop to be replaced, but now I've been replacing them myself and I'm tired of it. I've been using the replacement spokes that Juiced sells on Amazon. I check the spoke tension...

Yes, that would be nice. I'm having that early adopter regret.

Did those Blackburn 700x60 fenders end up fitting your Crosscurrent? I'm looking to get fenders and those look like the best bet right now.

That's been happening to me too lately. I'm pretty sure it's the battery jiggling loose when I hit bumps. I think someone on this forum put Velcro between the battery and the frame to keep it from disconnecting like that. I may try that.

My problem was a bad controller also. I took the bike to Bike Attack Electric in Santa Monica,CA and they diagnosed the controller and replaced it the same day. The bike is running normally now.

There was no corrosion on any of my connectors. However, I did just install the throttle and discovered that t̶h̶r̶o̶t̶t̶l̶e̶ ̶w̶o̶r̶k̶s̶ ̶b̶u̶t̶ ̶p̶e̶d̶a̶l̶ ̶a̶s̶s̶i̶s̶t̶ ̶s̶t̶i̶l̶l̶ ̶d̶o̶e̶s̶ ̶n̶o̶t̶ throttle worked for a minute while the bike was in the bike stand, but then I took it for a...

N̶o̶w̶ ̶I̶ ̶b̶e̶l̶i̶e̶v̶e̶ ̶t̶h̶e̶ ̶c̶l̶i̶c̶k̶i̶n̶g̶ ̶s̶o̶u̶n̶d̶ ̶w̶a̶s̶ ̶j̶u̶s̶t̶ ̶a̶ ̶l̶o̶o̶s̶e̶ ̶r̶e̶f̶l̶e̶c̶t̶o̶r̶ ̶o̶n̶ ̶o̶n̶e̶ ̶o̶f̶ ̶t̶h̶e̶ ̶p̶e̶d̶a̶l̶s̶ ̶a̶n̶d̶ ̶h̶a̶d̶ ̶n̶o̶t̶h̶i̶n̶g̶ ̶t̶o̶ ̶d̶o̶ ̶w̶i̶t̶h̶ ̶t̶h̶e̶ ̶p̶e̶d̶a̶l̶ ̶a̶s̶s̶i̶s̶t̶ ̶p̶r̶o̶b̶l̶e̶m̶.̶ I removed the reflector and...

Thanks, Luis. I just sent an email to [email protected]

I'm having the same issue. Yesterday I noticed some sort of intermittent clicking sound coming from somewhere on the bike. I gave the bike a once over and the only thing I noticed that it could be is the battery, which can move slightly and tap against the frame. This morning the assist quit...

I just replaced my first tube in the rear wheel and I can second that you will need an offset 18mm box wrench to remove the wheel. And that putting the wheel back is very tight. I scraped up the chain stay with the disc brake and the torque sensor got knocked around a bit too. Unfortunately...

My rear tube blew while riding this morning. I had it at 65-70psi. I'm think I'm going to had to keep the psi at 55 or below from now on.