Search results

My speedometer works in PAS 0. Also, setting SHD to 0 does not alter the slight resistance or the whirring sound of gears inside the hub. Your question made me curious though so I took it a step further and did a test run down a hill with SHD set to 0, without pedaling, and then the same run...

So I managed to squeeze in a few speed runs at the end of the day today. Didn't think I would be able to, it was stormy and rainy all day, but just in case during the day I installed some mudguards I bought from Cyrusher for their xf690 (I liked the dirt bike fender look more than the tame, old...

UPDATES So my motor arrived about a week ago, but it arrived cosmetically damaged. I don't blame Wallke fully; the packaging could have been better but it looked like they honestly tried; there were foam reinforcement panels where they were needed, but DHL (the shipper) seemed to really...

I was just looking for this a few days ago, thanks a lot.

Oh ok, I had changed the wheel size to 24" like John suggested to temp fix the speedo, that's probably what did it. Factory reset worked like a charm, thanks for the tip. Hope your guys get your new motors soon as well.

I got my tracking number Thursday, being shipped by DHL Air from Hong Kong. Shipping details weren't updated until today, my ETA for delivery here in Atlanta GA is Friday 7/2. Good timing on the updates too, because my PAS stopped working today. Was working fine on my last ride a couple days...

My last correspondence with Wallke was 2 days ago. I confirmed with them that all of the new motors being sent out are geared hub motors, which is good, and that they are supposed to fix our speedometer issues. I requested the regeneration feature be activated on mine, even though its kind of...

Also, if the regen factor makes you uncomfortable, I believe they said it only kicks in on PAS settings 0 & 1, so you can avoid it by staying in or going to a higher PAS setting whenever coasting or going downhill. I adjusted my PAS to 5 levels in the advanced settings, which will leave me with...

Shoutout and thanks to Timpo. Its only because of you that we figured what was wrong with our bikes and knew what to ask Wallke for, so kudos for that. And yes, I also told Wallke I would accept a new motor, after they confirmed they'll be sending a whole new wheel unit, minus the tube and...

If the geared hub motor was just as fast as the direct drive motors they previously used, I would be much more inclined to keep the motor I have and request a new controller instead. But the geared hubs they sent us aren't just lacking regen, they are also slower and weaker than the direct...

Updates. After finding this thread I sent Wallke a link & asked if they had run out of direct drive, regen capable motors and because of that, swapped ours for geared, non-regen capable motors instead. This is their response: "Hello, I greatly appreciate your reply as I understand your feeling...

I will give Wallke one more chance to give a reasonable response for their mistake. If they do not have something helpful to say by tomorrow, I will be joining you in leaving comments on every review of this bike about our experience with the product & company. I will also be contacting Paypal...

Yes, exactly. Whether or not it was a redesign or they simply ran out of stock motors, when they swapped the motor then they should have also swapped controllers to match so at least our speedo's would work. At the BARE MINIMUM there should have been a post on the product page notifying that the...

I responded by basically telling them that they can either (1) find what part on my bike is defective and send me a new one, or (2) we can start a return process. If they don't help us on one of those two fronts, I told them we'll be leaving comments on everything Wallke X3 about how we got...

Their reply to me: "Hi, Glad to hear from you, I took some times to confirm with my colleague. The display only count miles during pedal assist or throttle mode. Speed is measured at the motor, and is sensed and displayed only when the motor is providing motive power. Regarding the regen, some...

Anybody find a fix for this yet? I'm having the same problem. I sent an email to Wallke, & specified how the W-PAS regen feature is talked about in every review of this bike, they even wrote about it in my manual. So we'll see what they get back to me with... but to say our bikes simply don't...