Recent content by Quadracer

Yep upgraded wheels for offroad use. Running 2.8 tyres on 650 wheelworks rims.

I always charge to 100%. I also have two batteries and rotate them. Coming up three years old still showing 100% health in MC. I can't be bothered with charging to 80%. Just charge and ride. These things like to be used. The worst thing you can do is store these batteries with a low charge...

Ha was wondering that myself, I have done over 14000km on my 2017 Vado 3 about the same as you with the original motor. I have had the belt changed on the motor recently, apparently a scheduled service my lbs told me needed to be done between 10-15k km. I asked for the old belt back as I wanted...

I have found with chain replacements the chainring also needs to be changed. I have reversed the used chainring in the past and has worked well.

There is a spacer in the front fender. No changes are required for the wheels to fit. They work out slightly smaller size than the 29' OEM wheels and tyres so fit under fenders well and there was no need to change settings for wheel size.

Yes they are 650 wheels. They are a straight swap with no adjustments required on the cassette etc.

Thought i will show you all my wifes bike set up. These 2.8 tubless tyers can run at low psi 15-20 so a heap of grip on gravel. As you can see they have plenty of clearance if you want to have the fenders on. My wife runs this setup on all surfaces.🙂

I got my bike to comute to work mainly now has done over 14k km. We have a lot of rail trail rides here in NZ so swap the wheels for these weekend rides. They are gentle offroad rides. If mountain biking is your thing then levo is certainly best for that🙂

My wife and I have had many happy rides off road with the Vados. We have gone the larger tubless tyre (2.8) way with 650 rims for gravel rides. No punctures yet. The bike feels so different and nimble with this setup, im always dissapointed to change my bike back to the standard commuter setup.

Yes the bottom half of the cover can be removed without removing the cranks exposing all the the rear light connecter. The cranks do not have to be removed.

The bridge crosses Tauranga harbour New Zealand. Still used for rail. I live in Auckland but travel regularly for rides. Will get back to it now the virus here has settled and we are now allowed to travel.

Hi dbison. Yes they are great bikes. I added a waterproof plug on the outside of the motor cover so i can easily remove the fenders without taking the motor cover off each time. Earlier i just unpluged the connector and left it exposed. I didnt have any issues doing this but we were riding in...

You can remove the rear fender by removing the engine plastic cover (4 screws) then unplug the rear light cable. Its easy to do i used to do it when planning off road rides.

I agree. I have also checked my temp after a longer ride and its around 50deg. I remeber someone on here having motor issues with a temp over 100deg!

I purchased a second battery (604wh) through my lbs for my Vado. No issues with swapping the batteries you would hope the battery would arrive with the latest software installed. The mission control app will tell you what version software you have. The plastic battery cover has to be ordered...