harryS's latest activity
-
harryS replied to the thread Presta valve material.An after market sensor on a car has to be (a) real tight and (b) sloshes thru rain/slush 24/7. My adapters are on finger tight. The... -
harryS replied to the thread Help with getting power from motor.You put it all together and it worked! Hurray. Then you extended the wires. Doesn't work. That's a logical place to start looking I'm...
-
harryS replied to the thread hi, new Lectric dude from the Chicago area.The lake path can be quite busy on weekends across from downtown. Yes, I think it's fun and scenic. Expect to drop some bucks on parking...
-
-
harryS replied to the thread Presta valve material.I've kept brass Shraeder adapters screwed on the Presta tubes on two bikes for ten years now. They're always being screwed on/off to...
-
harryS replied to the thread Start button must be held down or power goes out..The start button is just a couple of momentary contact switches. The display is supposed to keep the controller powered on after your...
-
A classic mistake. I've done it many times myself.
-
Found my mistake, what a dummy. I used the female end of an extention cable to splice in and didn't take in consideration that the...
-
I had my firing order wrong when I wired in my KT controller, and I didn't get any errors. The motor just didn't work. So I'm thinking...
-
harryS replied to the thread Splice motor cable to controller..I figured he was just checking to see that each pin on the cable had a connection `to somewhere on the controller. Come to think of it...
-
harryS replied to the thread Reention battery LED board - DEL-I548V-4P220000 Where to find a replacement.I don't see anything wrong with the picture, but the contrast may not show a broken stub on the switch, How about looking for a...
-
-
harryS replied to the thread Splice motor cable to controller..The first time I spliced together a 9 pin motor cable nine years ago, my display told me I screwed up by announcing a Hall error, I...
-
-
harryS reacted to 6zfshdb's post in the thread Light(est) small Ebike with throttle for disabled wife (5'2") with
Like.
You've already received many good suggestions and I thought I'd add mine to the list. I don't normally recommend specific bikes since... -
THIS! Bought my 1st ebike is '21 for camping. Now? I have 5 of my own (3 class 1 emtb's, 1 commuter and 1 SUV-type). I've also ridden a...
-
You can buy a fairly good e-bike for your uses in the $800-$1,200 range and should be happy with it for the most part. My wife bought a...
-
Definitely Velotric. We can't keep them in stock.
