After several attempts of different methods, I finally got it done today. All you need is a 24 x 3 inch schrader valve tube (I got mine on Ebay) and 8 oz bottle of Orange Seal. (and ratchet strap to help tire be inflated)
Remove tire and existing tube, install 24 inch tube on rim and pump up so it is centered and seam is along the top.
Now use blade to start and scissors to cut around the top seam so it will open up and lay across the rim.
Clean off all the white powder.
Install tire back on, little trick getting the tube pulled back out as tire goes on.
Use a bit of soapy water or windex around tire to help it set the bead
Use a ratchet strap around the tire to make a tighter fit so it can be inflated with a regular tire pump.
Loosen ratchet strap as tire starts inflating.
If all went well, remove valve core, add half bottle (4 oz) of Orange seal (I has to use a smaller hose inside Orange Seal filler hose). Reinstall ratchet strap to aid in inflating again.
Shake tire back and forth and around to get sealer to fill and air leaks, go for a quick ride.
Use scissors to cut tube excess along the rim.
Remove tire and existing tube, install 24 inch tube on rim and pump up so it is centered and seam is along the top.
Now use blade to start and scissors to cut around the top seam so it will open up and lay across the rim.
Clean off all the white powder.
Install tire back on, little trick getting the tube pulled back out as tire goes on.
Use a bit of soapy water or windex around tire to help it set the bead
Use a ratchet strap around the tire to make a tighter fit so it can be inflated with a regular tire pump.
Loosen ratchet strap as tire starts inflating.
If all went well, remove valve core, add half bottle (4 oz) of Orange seal (I has to use a smaller hose inside Orange Seal filler hose). Reinstall ratchet strap to aid in inflating again.
Shake tire back and forth and around to get sealer to fill and air leaks, go for a quick ride.
Use scissors to cut tube excess along the rim.
