Bosch Intuvia problem (display doesn't turn on bike)

[st2b]

Hello!

I have a Haibike Xduro Cross 2013. It didn't move for about two years, and then I bought it. I have the following problem: the bike does not turn on from the button that is located on the Intuvia. At the same time, if you press the button that is located on the battery, the display lights up and everything works. Switching off from the Intuvia button is normal. Also, after my trips, their data is not saved in the Intuvia, but remains old.

I wiped my Intuvia contacts with alcohol, but it didn't help... There is no firmware information in the Intuvia settings menu. It seems to me that the problem may be in the built-in battery in Intuvia.

Can anyone know what else might be the problem and how to solve it?

Thanks!

 

[fooferdoggie]

I have had that issue though I never though to push the button on the battery. I used this to clean all the contacts battery and the intuvia and it has not done it since. but it could be the battery though its pretty soon for that. https://www.amazon.com/gp/product/B000P1C8UO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[st2b]

I have had that issue though I never though to push the button on the battery. I used this to clean all the contacts battery and the intuvia and it has not done it since. but it could be the battery though its pretty soon for that. https://www.amazon.com/gp/product/B000P1C8UO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Thank you, but at first sight there is no corrosion. I will try to use a similar tool to clear contacts.

 

[PDXzap]

Bosch Intuvia battery

Just wondering if anyone knows how to tell if the battery inside the Intuvia display is fully charged? I went through the settings and read the manual and don't see any info on a battery indicator for the display itself. Here's what the Bosch Intuvia manual says: To charge the internal battery...

electricbikereview.com

 

[Ravi Kempaiah]

It seems to me that the problem may be in the built-in battery in Intuvia.

Yup, replacing the Intuvia battery should resolve your issue. There are threads like this littered everywhere, you may find a relevant post if you search for them.

Intuvia shutting down randomly (problem solved!!! hurray!)

At last, after 2 months of searching forums and dealers, I've pined down the problem! Ok, I've been reading a lot of thread with the same issues, and many of you gave me good hints in how to solved them, I thank you. Now here's a recap of my last 2 month: Model: Felt Lebowsk-E Bosch...

electricbikereview.com

 

[Dallant]

Not to change the subject but does anyone know if the Purion has an internal battery and, if so, what that battery is?

 

[Ravi Kempaiah]

Not to change the subject but does anyone know if the Purion has an internal battery and, if so, what that battery is?

See this thread here: https://electricbikereview.com/forums/threads/boschs-purion-change-display-battery.14707/

 

[fooferdoggie]

Thank you, but at first sight there is no corrosion. I will try to use a similar tool to clear contacts.

I did not have corrosion the bike was only 2 months old but it sure fixed it.

 

[Dallant]

See this thread here: https://electricbikereview.com/forums/threads/boschs-purion-change-display-battery.14707/

Thanks. I always wash my hands with warm water and soap before handling button batteries.

 

[st2b]

I did not have corrosion the bike was only 2 months old but it sure fixed it.

I cleaned all the contacts with a special spray, but it didn't help either.

 

[Dallant]

I cleaned all the contacts with a special spray, but it didn't help either.

My guess is this is just like using a basic dialectic grease. Improves electrical contact, reduces future corrosion, and keeps contact area cleaner.

 

[st2b]

Yup, replacing the Intuvia battery should resolve your issue. There are threads like this littered everywhere, you may find a relevant post if you search for them.

Intuvia shutting down randomly (problem solved!!! hurray!)

At last, after 2 months of searching forums and dealers, I've pined down the problem! Ok, I've been reading a lot of thread with the same issues, and many of you gave me good hints in how to solved them, I thank you. Now here's a recap of my last 2 month: Model: Felt Lebowsk-E Bosch...

electricbikereview.com

As I understand it, this model of Intuvia has a rechargeable battery, but I don't know where to buy it to replace...

 

[rich c]

As I understand it, this model of Intuvia has a rechargeable battery, but I don't know where to buy it to replace...

It’s not a simple take the battery out and replace it. The battery is a flat wafer with wires that are soldered to the board. As Ravi said, lots of this on the Internet. I think even a video on YouTube about replacing that battery. If you aren’t skilled in soldering on a circuit board, then it’s not DIY for you.

 

[fooferdoggie]

I cleaned all the contacts with a special spray, but it didn't help either.

then you eliminated that problem.

 

[st2b]

then you eliminated that problem.

No, the problem could not be fixed.

 

[DirkBolle]

Hello!

I have a Haibike Xduro Cross 2013. It didn't move for about two years, and then I bought it. I have the following problem: the bike does not turn on from the button that is located on the Intuvia. At the same time, if you press the button that is located on the battery, the display lights up and everything works. Switching off from the Intuvia button is normal. Also, after my trips, their data is not saved in the Intuvia, but remains old.

I wiped my Intuvia contacts with alcohol, but it didn't help... There is no firmware information in the Intuvia settings menu. It seems to me that the problem may be in the built-in battery in Intuvia.

Can anyone know what else might be the problem and how to solve it?

Thanks!

Hello!

I have a Haibike Xduro Cross 2013. It didn't move for about two years, and then I bought it. I have the following problem: the bike does not turn on from the button that is located on the Intuvia. At the same time, if you press the button that is located on the battery, the display lights up and everything works. Switching off from the Intuvia button is normal. Also, after my trips, their data is not saved in the Intuvia, but remains old.

I wiped my Intuvia contacts with alcohol, but it didn't help... There is no firmware information in the Intuvia settings menu. It seems to me that the problem may be in the built-in battery in Intuvia.

Can anyone know what else might be the problem and how to solve it?

Thanks!

My experience:

Bosch Intuvia battery

Just wondering if anyone knows how to tell if the battery inside the Intuvia display is fully charged? I went through the settings and read the manual and don't see any info on a battery indicator for the display itself. Here's what the Bosch Intuvia manual says: To charge the internal battery...

electricbikereview.com