Search results

Yes that is what I purchased. Took a month to arrive. Yes do the 180's at the same time. Do not take the entire old brakes off, leave the mounting brackets in place, also I removed the wire caps and bought replacements to use after pulling the cables.

If I had to do it again I would also add 180 rotors as the pads do not fully seat on the 160's. Better contact also means better stops. Still may do that but I hate pulling down the wheels

No I purchased mine direct from Ali Express just over $40.00 for front and rears. Install was simple no modifications.used the same mounts from the old brakes not the ones on the kit

DID front and rear wire pull hydro,. brakes as per the youtube video. Seem o stop quicker, but at the least no more rotor deflection and way easier to center the calipers.

Correct I did not have a hitch mount to the frame, just the bumper that I attached a hitch carrier to.

It works great. However there is also one other caveat. Most 4" bumper tubes on RV's are thin walled and will not hold the weight. You will notice I have twin spares as well. I installed a new rear 4" square tube with 3 times the gauge of thickness, will now hold over 1000 lbs combined. It is...

https://electricbikereview.com/forums/threads/racks.38061/ Will hold 2 bikes and under $100.00 holds 500 lbs. takes a little modification to make it fit perfect

I made one other mod. to the carrier. I used the anti rattle plate that comes with the carrier and the u bolt together with piece of 1/2" black gas pipe to keep the bikes upright. (Picture 1 and 3) Second bike just goes on opposite to the way the first faces. Use tie downs of any thing you want...

I will mount them and post tomorrow. Watch this space :)

Yes I enjoy reading all the great informative posts. It just seemed to.me folks were spending over 3-400 on racks. This works great and you do have some access to the rear of a SUV.

I have read many posts regarding racks for our fatties. This is what I purchased. 500 capacity. https://www.ebay.com/itm/60-Mounted-Folding-Truck-Car-Cargo-Carrier-Basket-Luggage-Rack-Hitch-Travel/353198702814?hash=item523c4880de:g:jtUAAOSwnolfWiDZ Modification (cut diagonal top bar) was as...

This is what I got. 500 lb capacity. Small modification. I cut the top bar on diagonal on the ends to allow the tires to sit flat, finished with 1"x1' plastic end caps to complete . Velcro straps and cinch straps hold my 2 bikes in place. Under $100..........folds up when not in use...

Not sure if you still need a fix but electrical crimp on barrel type work to seal the ends.

Unless you are going to plug into a 240v system (Not in the USA without a different plug) it will not be an. Most laptops use these two connection type cords.

I have small Garmin Nuvi and that is first thing going on the bars after my hands.. :)

https://www.ebay.com/itm/Ritchey-Comp-Press-Fit-Semi-Integrated-44mm-1-1-8-Bike-Headset/193614045465 or https://www.ebay.com/itm/ZTTO-Bicycle-Headset-MTB-Road-Bike-Steering-Column-44mm-Straight-Tube-Fork-Bike/353151780892 or...

You can source most parts on either Amazon or eBay now.

How about a link??? I am getting a black and white step through in the next few weeks and am gathering goodies to install.