Search results

After taking apart the frame charging port , I found it was never plugged into the frame battery connection.

I can’t get the battery to charge via the frame port, Anyone else having this issue?

So , it’s not a DYI job?

When I hit a hard bump, the battery turns off. The battery is just slightly not flush with frame. I can press it in but springs back out a little.

Thank You!,, This info is exactly what I needed. I woke up at 1:30 AM last night and was thinking about this for hours!, I had come to the same conclusion that the computer “head” must be awakened first to turn on the main battery.

Does anyone have the start up instructions for the Trek Domane HP+ ? I dont have the instructuons and I cant figure out how to turn it on. Does the main display computer need to be charged or does it run of the main battery? I fully charged the battery. The bike is new.

Anything above 25 mph on a fat bike with lower pressure gets a little sketchy. If you have the pressure too high the off road ride is harsh.

What wheel size should be programmed in the settings for a 26” Fat Tire Bike with 4.5” tires? Its set a 26” but does that mean old school Mt Bike Wheels? Isn't a 26” Fat Tire 4.5” tire closer to a 29” wheel in diameter?

I don’t know if this will help but I made a bracket to reinforce the motor bracket. I mounted a piece of angle aluminum to the water bottle mounta and then bent another piece down to the motor bracket.

Would a set screw through this hole help to secure the axel in the BB?

Anyone have some pictures on how they mounted a Speed Sensor on a Fat Bike with wide Stays. How close does the magnet need to be to the sensor. If I remember correctly,the sensor on my first Ebike, a Rambo bike, the magnet was far away from the sensor.

Using a Sunrace 11-46 . How will the derail work when you move the 46T cog outward 2-3 spaces?

Use only 7-8 gears out of the 10sp.Cassete. I need a better chainline so you put thise “unused” cigs behind the others, it moves the cassette out further for a better chainline

I don’t fully understand how to rework a cassette and have the derailleur still make the 46t cog if it’s moved outboard a couple gear spaces

How are you coming up with 18mm offset on the 42T? i have a 42T and measured about 11mm offset. EDIT - I figured they sent the wrong Chainring I was looking at the standard not the HD so the standard one has about 11mm

How much more offset does the Lekkie 40T Bling Ring with the new machined housing give you over the a standard 42 Tooth Lekkie Ring? With the the 42 Lekkie , my perfect straight chainline is at the 3rd in cog at the back. How much of an angle can you run the chain?

With this hub work with a 190 mm spaced rear hub.