Search results

  1. R

    Tektro hydraulic sensor (2 wire) splice to Bafang sensor (3 pin)

    ok.. i bought my E525 directly from Tektro (USA) website located in Utah.. i used the bafang cable that came with my kit. This was my experience. good luch my friend. Sounds like you have something i've never seen before and that is something you will need to figure out. PEACE
  2. R

    Tektro hydraulic sensor (2 wire) splice to Bafang sensor (3 pin)

    the bare wires off the Tektro HD E525 and E700 series, are blue and black according to Tektro CS... If you're using Bafang Julet cables like the one in the photo. it will be red/black/white... If you have other colors that these, i imagine you have a model intended for a market other than USA...
  3. R

    Tektro hydraulic sensor (2 wire) splice to Bafang sensor (3 pin)

    Photo ebay.com/itm/224926124648?hash=item345ea44a68:g:YOwAAOSwg3ViTyvc
  4. R

    Tektro hydraulic sensor (2 wire) splice to Bafang sensor (3 pin)

    Barry. i'm working on this project now. I cut the cable off my unused bafang brake lever (for cable actuated brakes).. That is the end you need to plug into the harness (for brake power cut off). I stripped the outer cable housing, and there are 3 fine wires, Red-Black'White.. it made it really...
  5. R

    Tektro hydraulic sensor (2 wire) splice to Bafang sensor (3 pin)

    or just take it to your ebike mechanic... They understand how to connect a 2 bare wire to a Bafang 3pin connector.
  6. R

    Tektro hydraulic sensor (2 wire) splice to Bafang sensor (3 pin)

    Hello.. i spoke to Tektro Customer Service David 801-648-7237 abut this very issue.. The wiring diagram for a Bafang 3 pin connector: of the two bare wires off the bottm of the E700 series and E525 lever, The Blue is positive, the black is negative. You can cut a Bafang Ebrake extender cable...
  7. R

    Bafang DPC-18 Ebike Display Settings

    Thanks.. very interesting. I really need the Wattage consumption reading to monitor my solar e-trike system.
  8. R

    Bafang DPC-18 Ebike Display Settings

    Feliz... is the KT-LCD8H Compatible with a Bafang and a 52v battery system..? The specs i see online show a different pin connector. and is limited to 36v or 48v. There is no information if it has a wattage consumption meter or a voltage meter. Do you know what type of display this is...
  9. R

    Custom Electric Recumbent Ebike with Solar Charging Trailer

    Updated YouTube video of E-Trike: youtube.com/watch?v=3lYMda1HplI Updated YouTube video of Solar Trailer: youtube.com/watch?v=KKTf2EPRPek&t Check out my other youtube channel (Rob K) video e-trike rides.
  10. R

    Bafang DPC-18 Ebike Display Settings

    Hello.. The Bafang Full Color displays: 500c, 750c, 850c, DCP-18 are impossible to see in the sunlight. This is where we ride our ebikes. Unless you want to pull into the shade or bring the ebike indoors, you won't be able to see your critical information like: speed, odo, battery level...
  11. R

    Custom Electric Recumbent Ebike with Solar Charging Trailer

    Photos of the Solar Ebike Trailer
  12. R

    Custom Electric Recumbent Ebike with Solar Charging Trailer

    Solar Electric Ebike Trailer. I use it with my Azub T-Tris 26 recumbent e-trike. Honza Gala azub.eu/recumbent-bikes-and-trikes Equipped with: 750w 48v Bafang Mid-Drive. (700c display viewing wattage consumption) mounted on: t-cycle.com/collections/accessory-mounts I...
  13. R

    Advice for electric recumbent trike riders.

    Hello.. The rear hub is a great choice when mounting a battery to the boom. I'm not a skilled wheel builder to put a hub in the rear wheel (that can get expensive to have a wheel built) . My situation was just the opposite, I used a BBS02 and have (2) two TerracCycle frame mounts under the seat...
  14. R

    Advice for electric recumbent trike riders.

    Just a quick response. I commend you for knowing your limits for safety. In over 6k miles on a recumbent tadpole trike, I have only had one close call when It comes to tipping over. I had to turn very abruptly to avoid a car door opening. If I had been on a bicycle, I would have ran into...
  15. R

    Advice for electric recumbent trike riders.

    Hello R... It is my opinion that a delta trike is far more likely to tip over on a turn while braking. I feel really stable on a tadpole. 2 wheels in front. It has to do with inertia and turning while braking that make deltas tippy. When referring to safety on "recumbents" . it is important...
  16. R

    Advice for electric recumbent trike riders.

    Hello. As a 53yo man who 6 years ago had to get a recumbent trike because of complications from Multiple Sclerosis and type 1 diabetes that caused balance issues. I understand the desire to remain as healthy and active as possible. I fully understand conserving on cost. I found that working...
  17. R

    Advice for electric recumbent trike riders.

    Yes.. The AZUB Ti-Fly is an impressive machine, For me, I would choose the single lever, Dual pull T525 hydraulic brakes on my trike. That way I can put the rear brake on my left side. As a motorcycle rider, my instinct is to pull the right brake to stop. In that split second, I want my...
  18. R

    Advice for electric recumbent trike riders.

    My name is Robb from Portland, Oregon. Where are you located..? My friend Court ask me to look at your question and reach out to you. I had some knee pain also, On a recumbent trike, crank arm length is very important to figure in. I’m just 5’7” tall, (short) and my knee pain was from riding...
Back