Search results

I just received this info, very interesting, and getting tougher.....now if the price will come down a wee bit.... https://bikebac.com/en-us/collections/abus-bike-locks/products/granit%E2%84%A2-super-extreme-2500 ymmv

Just thought I would check and see if there was any other air gun shooters around here> I shoot both C02 and HPA in the 4 different calibers 177, 20, 22 and 25 cal, since 2015. Tia,

A little history here to provide more info, on the above question. My first love is riding wild horse/cow trails cross country, the major problem is the rear derailleur keep getting bent/destroyed by the Sage brush that is along side these trails. I have replaced at least 3 different DR, and...

Guys/Gals I have been thinking about adding these to the bikes, so I can reduce the glove bulkiness ( US Military Lobster Claw types), the average weather temps are into the low teens to 40* during the day times, but with cold North winds normally. https://www.ebay.com/itm/365254551682...

Neat bike, would love to give it one ride... https://www.ebay.com/itm/176736898040 Never see a derailleur mounted like this before: Look at the 4 th photo, Shimano Brand name. Anyone have more info on this derailleur? Tia,

I have been slowly updating the parts on "Old Blu", my Montague standard bike, she got new shoes/tubes all the way around, Schwalbe Pickup's, got a suspension seat post, new brakes front and back, lubed all the cables for the brakes, shifters etc. Added the new front suspension fork, 4" travel...

Guys Which direction are they installed? On one bike, I have, they are installed with the open side towards the ball bearings. On the other bike, they are installed with the open side facing away from the ball bearings, this bike also has a tapered rubber cone that has a lip of the rubber cone...

I finally got all the parts required to change over to the suspension fork, I think, and up jumped this problem. I am changing out the front axle to a solid axle (No front skewer type as before), the new axle set set came with 7-1/4" and 7- 3/16" caged bearing sets, the OEM original front...

Jeremy and his little Hot water gremlin, decided to visit me, now it's a wood stove gremlin. It cause all kinds of hate and discontent, took both the horizontal blowers out, bronze bearings on each ends are shot. They must think these blowers are made of Gold, between $300-500 for 2. I am going...

Well guys, the new fork got here AND, I am not comfortable about this front axle length fitting in the new suspension fork, I have the following measurements for the fork and axle on the front hub. Fork measurements: (Where the axle locks into the fork) Inside distance/space = 3.390"/86.10mm...

Ok Guys I have a major problem, in that I want to replace my 2009 Montague rigid fork for general purpose riding suspension fork. The spec's for the replacement fork are: 1-1/8" x 26 tpi, (threaded) spring type, "V" type brakes, 26" wheel size. Some of the ones I am looking at are: (1st choice)...

Looking to buy a OEM Montague Rack Stand with all the parts, if available please contact me. No longer needed. Thank you.

Guys, How many of the different brand name of E bike batteries have a Hailong type connect plugs for their battery's? Hailong plug = https://www.amazon.com/Kqcibz-Battery-Discharge-Connector-Hailong/dp/B0CYZD2YJ5/ref=asc_df_B0CYZD2YJ5/ I know Bikonit, Biktrix, Electric Brands do. Any other...

Guys, I just got a new bike, yes it is a standard pedal type, got it for the better half, https://www.montaguebikes.com/cx-comfort-folding-bike-2009/ It is a neat lite bike, (32#'s) when compared to my 2 electric bike ( 100#'s), after reading the above spec's etc, I have to find and replace 2...

Prowling around and found this info, sounds interesting, https://lightest.bike/SHOP/Lightest-ebike-kit-Product-Configurator-p521699922 Your thoughts and suggestions....

Guys, I want to build a bike for the better half, she wants to ride, but does not like my heavy weight Wart Hog and Juggs 4 bikes. She want the lightest one possible, and I have come up with these requirements to fit our trails/back roads around here. 1. Must be a step thru style, 2. Must be a...

Guys and Gals, Do they make self contained head lights that attach on the front forks, around the front axle area? I have a hard time seeing ruts/holes with the normal OEM handlebar lights, as there is no shadow that clearly shows up from these type of lights. Your thoughts or suggestions, Tia

I have had these riding glasses for over a year now, and they have stood the test of time for me, I am very hard on glasses, they don't seem to last long around me. I am very pleased with these glasses, and these glasses have all 3 of the interchangeable lens, Smoke (Grey), Yellow and clear...

Hey Guys My new air pump for the 48 and 52 V batteries just got here, it is this model, https://www.amazon.com/inflator-compressor-motorcycle-electric-vehicles/dp/B0986MWSFX It has the goofy plug on it, so I made a couple of brass prongs that fit the plug and pressed them into the slots, I also...

I just bought and received 4 and 5 pin contact covers that fit the Hailong type battery pins. Very nice and fit tight and are Bright Red colored, Contact Brian here, here: if you want some. Here is the current info for these contact covers, 4 pin: https://www.ebay.com/itm/326216972435 5 pin...