Search results

Silicone grease is not necessary for a concealed connector... but if only to aid with disassembly in the future. Dust wouldn't be a problem as I would only apply it to the plastic on the julet and it'll be under the shrink wrap. You connect to the display as that cable has communication with...

Yes I put shrink wrap on tucked away connectors. And when necessary, just a drop of silicone grease. Less is MORE!! If you would have pinned it out when it happened (as suggested) you would have found the issue then. ¡I'M BATMAN!

My first cycling memory was getting my toes chewed in the front tire spokes of a tricycle. Lesson learned : Shoes = good

I think EBR and past customers are on the Zen stepchild list. I guess I'm fortunate in that my bike doesn't have any Zen proprietary parts and once debugged has been working well.

I didn't over think it.. I snug'd it up and torqued the locknut down with a little blue Loctite. Didn't budge in over 12k mi.

Yeah one solid piece is better than folding up soft rubber. I used a piece of sprinkler funny pipe that I manipulated with a knife and a heat gun. It fit perfectly with minimal give and looks as if it was supplied with the kit the way it wrapped the downtube. Well any way you get out on your...

What's with you guys? Are you riding wearing bell_bottoms? 🙃

Me... I went for a 25mi ride.

You spend far too much time yanking your chain 🙃

It won't ... Especially if you think that a waxing will last the life of the chain. Only advantage of wax is no greasy hands when handling. I bought some wax and Teflon powder... And I might one day use it as an initial treatment but right now 5 hours is a lot more valuable to me than the $18...

The only balls that the republican congress are aware of are the ones on their chins

He should have an indication on the display if that's the problem... but I'm guessing he'll be back in 4 years

And you don't think that they are turning over in their graves with the current executive abuse and the blind, kneeling compliance of the remaining two branches. Scared submissive bitches they were not, nor did they surround themselves with yes_men.

My HHA needed the day off so I'm home with mom. Mom missed the 150th celebration by 16 months

If they try to put that pos's face on Rushmore... I'll go postal!

I had googled it to see if anything came up and the wizard said it is a common misspelling of Velotric

Maybe give Shannon a call?!?

I doubt it I believe if anything it's 500w. I doubt it's a BBS* version of a Bafang If on a Velotric it's probably one of the OEM motors which means the axle incorporates both the torque and cadence sensors. Anything is possible but a 4 year old bike that's been pretty much sitting... We...

Rereading this... I think Artie is a little confused. 4 years ago, Bafang didn't offer a 1500w mid drive and for sure it wasn't on a Velotrix? / Velotric? 4 years ago the M620 was 1000w and now the M630 is 1500w.... though mod controller/motors from Innotrace were available at 1500w and above.

25 miles a year... Man you're tearing it up! 🙃 As stated I'd check the brake cut outs. They're not necessary for the bike to work so you can try unplugging them near the levers. Also check the speed sensor magnet Then I'd go over all the connectors... intermittent many times means a...