Search results

With or without throttle on a V2 controller you can see 30mph on flat pavement. I have never run throttle only until the battery died. I would say 15 miles to 25 miles depending on the terrain. I have throttled back my v2 controller to protect the drivetrain. Check the box to allow Fixed...

Doing my bike check I found the rear thru axle almost came out. The screw that holds the handle came loose and I almost lost the handle. Thread locker and reassembled. Crazy I never thought the quick release handle could come off. Add that to your next bike check. The small allen head screw...

This is for a Juiced Ripcurrent bike. If this is for another bike they might not work. Ripcurrent rims are for 26x4" tires.

I am going to put the front and rear RCS wheels on Ebay this weekend. The rear motor is in excellent condition no issues. Less that 1,000 miles on them both. Wheels were trued by local bike shop last year. I sold my RCS and this is the spare set of wheels I had. Message me if interested. SOLD

To update from my last ride which was 15 miles and I had 55% battery left. Mostly trail and punchy climbs which is my standard ride. Level 2 PAS for flowy trails was great. Level 3 PAS was great for the more techy sections with a few short climbs. Level 4 PAS I did try on a few really tough...

My use of the x2 has been for trails that have been carved out of the old Florida Phosphate mines. I have been testing a few settings and wanted to share them. Most of my rides are in PAS 1-3 and when needed a little goose of the throttle. I have lowered my AMPS Max (Bike cfg) tab since I have a...

I wanted to start a discussion on the M600 v2 controller tuning. I have posted a few questions on the Luna Forum but did not get any responses. So I thought I would see if people who have a v2 controller can offer suggestions for tuning the v2 controller for different uses. I will repost my...

The SRAM 12 speed the X2 comes with is good to start with. I did lock out the lowest gear as it was too low for me to really use. I just adjusted the low limit screw. 11-13-15-17-19-22-25-28-32-36-42-50 To keep from breaking chains I lowered the Current Max setting. This will also reduce battery...

I do not have the exact stock settings. I have also changed my settings. Open a support ticket with Luna or Message Marcos: https://electricbike.com/forum/member/18329-marcos

Color 860C is much easier to see on the brightest day. Worth the upgrade IMO.

IMO v2 Controller has too much power for trail use. I had to lower the Max Amp to 25amps to reduce the power and lower battery draw. Luna sells shorter crank arms for X2. Start with the what Luna includes on the bike. Get use to it before throwing $$ into the bike. I am on my 2nd Luna and have...

Yes 860C display. Had to load latest VESC firmware to get 860c to work with v2 controller. No issues with Bluetooth to v2 connectivity. I have the IOS and Android phones. Need android to flash firmware. I got a $40 burner phone that I use to side load the Luna VESC app. No issues with handlebar...

Luna replaced the M600 with a new unit. Installed and it all works again! I have been playing around with the v2 controller settings. Mostly changing the max amps to lower the power output and reduce the battery draw. I hear the next VESC firmware release will include a dynamic power output...

I got the Ebike Thumb Throttle BAFANG 300X and plugged it into the harness. Turned the bike on and it would not move the motor. Maybe the wiring or the design of the throttle. Went back to using the stock throttle which works. It does say BAFNAG1T4 cable is required for use.

I ordered a new Bafang throttle. Looks a little slimmer over the stock throttle. Should be here next week. I'll let you know what I think. Bafang Throttle

New install of a modified Nukeproof Mega Alloy 275 Chain Stay on the X2. I had to make a few cuts but it did fit well. The double sided tape included sticks well. I added a bead of RTV sealer around the edges to keep the water out. Not bad for $10 bucks.

It's been 9 months since I swapped out the 9 speed cassette from the stock 11-32T to 11-34T. It has wild acceleration when pedaling in 1st-2nd gear and the 48T chainring. The bike 0-20mph is much faster than any Juiced Ripcurrent S or even the Aventon Adventure ebikes I have had with stock...

What I said about the dielectric grease don't use very much. I put too much on and it caused the motor to act up.

I have 3 Juiced Ripcurrent S one is a step thru. The brakes can be difficult to fix if you are not sure how to do it. Talk to a local bike shop about bringing the bike in to address the brakes. Learn from the bike shop tech so next time you can better understand the brake system. For my bikes I...

The 3 plugs that power, provide speed sensor and controller I have added dielectric grease to the plugs to help keep moisture and water out. The plugs are IPX5 rated. The motor is not IP rated but is sealed. Best to accept IPX5 as the water-resistant level you can expect due to plugs. I have put...