Search results

Yeah, I was confused by this mode and was thinking there is something wrong and I tried to set the speed limit in the Innotrace X2 display advanced settings (which does not affect it) before he demonstrated how to disable this mode with the Innotrace X2 display (press buttons Down and Mode for 2...

Great news! Krasnodar has fixed my motor and was able to set it up to 3000W! Now it feels significantly more powerful and on the throttle it almost lifts the front wheel! It was so powerful the battery BMS turned the battery down under hard acceleration. Finally when I know the motor works...

That's why need to use the official firmware and the flashing method Krasnodar uses. Alternative solution for my case will be if Krasnodar will turn the server on for limited time frame (if Krasnodar is afraid the server can be attacked by hackers), then he will create a temporary "master"...

It is not hard. You just need the bypassed X1 Tool from here https://electricbikereview.com/forums/threads/archon-x1-programming-thread-questions-and-experiences.40034/page-8#post-596912 And a FTDI FT232R USB to serial adapter...

I am talking not about hacked X1 Tool. I am talking about the official X1 Tool you use to setup the motors. I live in the USA and delivering the motor here from Germany was quite challenging task. Sending the motor back to Germany is another quite challenging task. It will also leave me without...

OK. That's likely not the problem in my case. It looks like all I need is to have access to the X1 Tool utility "master" functions to lift the maximum amperage from 5A to 60A on my controller. The X1 Tool utility has those functions when you log in under "master" login. So we need the unlocked...

Hello Krasnodar. Thank you for the update. The firmware flashed on the controller is displayed in the left bottom corner of the X1 Tool, so figuring out the firmware version should not be the problem.

I guess we are all on mercy of Krasnodar

As I understand they do not have different unlocked X1 Tool because of they did not offer such solution for me and they want to hack the X1 Tool completely. They said they flashed my motor with old firmware but I do not know what they used to flash it and it looks like flashing the motor with...

Here are some more details regarding my 5A controller. They said if the controller is not activated through the server with X1 Tool it is in "safe mode" limited to 5A amperage (which is what I have). As I understand they did not know about it before and that why they sold the motors and the...

Alright, more action is coming. Innotrace informed, that the Innotrace (Archon) controller firmware is probably based on the open-source VESC project motor firmware Krasnodar probably used. I am not sure how it will affect us the users of the Innorace X1 motor, but I hope this is the way they...

I think I have an idea how to work around the X1 Tool software and setup any motor to any power between 0 and 100A and then fine tune it with the bypassed X1 tool. First of all someone (maybe Innotrace) needs to find a motor with the maximum power. If evixone is looking for 100A power he needs...

Alright, here is the update on the situation with the Innotrace. Innotrace is willing to unlock the X1 Tool program completely but can not do this and is looking for someone who can help them. I guess they will provide necessary files and information to someone who can do something with it if it...

If somebody wants to build Innotrace programming dongle using a board with FTDI FT232RL chip and a 5 pins green circle female connector here is the wiring diagram Cables with 5 pins circle green connector...

You used version 1.0.10 of the program to decompile. Did you try to de compile the version 1.0.12 from here ? https://acts6-my.sharepoint.com/personal/r_czernig_inno-trace_de/_layouts/15/onedrive.aspx?ga=1&id=%2Fpersonal%2Fr%5Fczernig%5Finno%2Dtrace%5Fde%2FDocuments%2FX1%20Tool%2FTest

Not yet. He asked for some patience though so I guess it may take some time for them to resolve.

You mean the registrations and login? I said him that users can not register accounts and login with existing accounts. I also said him it would be nice to share the unlocked version of the X1 Tool program with advanced settings to change the motor amperage. Let's hope Innotrace will do this...

Good news, Krasnodar from Innotrace responded to me and he said he will support me. I hope they will set my motor to 60A. It would be ideal if Innotrace would just share the unlocked version of X1 Tool so I can just simply set the motor to 60A myself.

I do not know if there is a hardware difference between 3000W Innotrace X1 controller and lower power Innotrace X1 controllers or if it is just the programming settings. Here is my order from Innotrace and the two marked things were not delivered for some reason. Maybe they prepared a few...

Alright, the good news is the cable from Amazon with bypassed X1Tool utility work and it looks like I have Innotrace X1 controller (at least the X1 tool utility detects the motor). So thanks again to those guys who figured this out and shared this information. The bad news is Innotrace sent me...