Search results

  1. Mr. Coffee

    With 125% tariffs, will the e-bike market die?

    What's gonna happen to cash:
  2. Mr. Coffee

    With 125% tariffs, will the e-bike market die?

    Interesting you might say that, because I can't see how you can diversify when both stocks and bonds are going down at the same time. For that matter, most foreign markets are tanking too. Further, when both stocks and bonds are losing value things are really bad. You can argue about that but...
  3. Mr. Coffee

    With 125% tariffs, will the e-bike market die?

    Anyone over the age of 11 who brags about their IQ has serious problems. Anyone who brags about someone else's IQ at any age is worse.
  4. Mr. Coffee

    Is AMFLOW The Thing Or Just A Hype?

    That's assuming that the dominant factor in what makes a great e-bike is the nominal power output of the motor. In fact I'd argue that in most realistic riding conditions and you have a restricted e-bike the power output is very far down the list of factors you should care about.
  5. Mr. Coffee

    Anybody tried Clik tire valves?

    I don't know but when I set the bead on a tubeless tire I always remove the valve core first, pretty much regardless of what kind of valve and compressor or no compressor. Maybe you were taught differently. As for the rest of your concerns I have an expectation that adults on a group ride are...
  6. Mr. Coffee

    Can't decide! Nevo or Homage...

    Although an e-bike build from one of the boutique frame makers like Sklar with Chris King or Paul components would be something to behold. And would easily cost more than my first new car.
  7. Mr. Coffee

    Anybody tried Clik tire valves?

    My experience has been that by the time the valves get plugged by sealant a lot of sealant has dried inside the tire in interesting shapes which don't do much to protect you from punctures. I've never had a case with a sealant-plugged valve where I couldn't easily remove the valve and clean it...
  8. Mr. Coffee

    Anybody tried Clik tire valves?

    I'll only worry when I have to install an app and have a subscription to put air in my tires. Correction: I won't worry because I'll get rid of them in that case. We're talking about tire valves here. A (mostly) inexpensive part that is easy to swap out if you don't like 'em.
  9. Mr. Coffee

    Places that hate bicycle riders.

    Lodging that prohibits bringing any bike into your room. Grocery stores (and other businesses) that have bike racks but hide them around a corner so bike thieves can work undisturbed. MUPs that are considered free vehicle parking.
  10. Mr. Coffee

    Seth prefers Schrader valves

    Just a Google Search away: https://www.teravail.com/products/schrader-26-tube?srsltid=AfmBOoqd9KPD63lHMP6-DmGaXelqzFQOxM9INCz5PiP_wpTxw_gCZXON...
  11. Mr. Coffee

    Seth prefers Schrader valves

    The valve is skinnier so needs a smaller hole. Which theoretically compromises the strength of the rim less. This probably matters more (although I don't know how much it ever matters) on skinnier road bike tires. The little locking nut on the valve core can keep the whole valve from...
  12. Mr. Coffee

    Seth prefers Schrader valves

    Any working Presta valve has a valve core. You can't keep everything full of air without a valve core in place. On a lot of inner tubes the valve core is not removable. A lot of the lightweight TPU tubes don't have removable cores. If you like screw-on pump heads (like Lezyne pumps have) you...
  13. Mr. Coffee

    Seth prefers Schrader valves

    No, the brass-colored part at the top is the valve core. You undo the top nut a bit to let air in and out of the tire, because when it is in that position the valve is locked and can't leak (or admit) air. That whole assembly is simultaneously the greatest thing about Presta valves and their...
  14. Mr. Coffee

    Seth prefers Schrader valves

    Better valve core caps, and in cool colors: https://www.performancebike.com/granitedesign-juicy-nipples-presta-valve-core-remover-caps-blue-2-gvc18-10/p974125 Yeah, the plastic ones break but they are cheap and you can always carry spares. You probably should because you'll tend to lose them...
  15. Mr. Coffee

    Seth prefers Schrader valves

    All tubeless shrader valves I've ever seen have a lock nut. My own experience with tubeless (presta valves) is that the lock nuts tend to work loose and the best thing is to have at least two lock nuts on the valve to keep them in place. Another infuriating thing that can happen with a...
  16. Mr. Coffee

    Specialized Turbo Vado SL – Safety Recall for Chain Guard?

    Problem solved (unless you are wearing a robe): https://www.rei.com/product/543017/jogalite-wide-leg-band-15-inches
  17. Mr. Coffee

    Stranded on remote trail

    She probably always rode with her husband who had the GPS bike computer. And since she always rode with him it didn't occur to her that she might need it. I've been in enough situations where a GPS by itself didn't help me very much. You need good maps too. And even the best maps can get...
  18. Mr. Coffee

    Stranded on remote trail

    It was a routefinding error, riding alone, probably being in a hurry to catch up to her husband, and a flat tire. Small mishaps snowballed into thirty hours. If any one of those things didn't happen it probably would have been a non-story. Yes, you need a first aid kit. But you need the...
  19. Mr. Coffee

    Stranded on remote trail

    That's all great, except: Winds shift direction. Especially in the event of unexpected weather. What "adequate" and "necessary" tools are largely depends on the type of trip, its length, and availability of outside support. A first aid kit is of limited value in a medical emergency without...
  20. Mr. Coffee

    Helmet Safety Protection Ratings

    This is an inexpensive product that all of us need. You can put one of them on your helmet and stick one on the back of your cellphone case. What it is is a QR code sticker that links to a website endpoint. You register (free) with the website and put your contact and medical information...
Back