Search results

I have for sale Ludicrous V2 controller from Luna. Controller never used.

I have the Luna X1 and X2 ebikes with Bafang M600 motor. I would say use the throttle it's good to 20mph but in the highest gear 11 tooth it is really hard on the motor to start from a standstill. I have done that before and it really puts a strain on the whole drivetrain. Start around mid gear...

Maybe turn off the option to update firmware? https://www.stromerbike.com/en/support/software Firmware updates are sent automatically to your Stromer. To enable your Stromer to receive a firmware update, switch it on. The Stromer will need good mobile network reception for at least ten...

With cheap ebikes comes risk of battery fires. Any bike shop owners here care to chime in? I feel if you work on my cheap ebike electrical and it burns down my house good chance a law suite is coming your way. Working on any e-bike electrical issues comes with a certain risk of liability for a...

The M600 lock ring has teeth on the side facing the aluminum chainring. Tighten down the ring to 35nm or 25 ft lb.

With many parts in short supply you cannot expect to get parts from Luna when needed. Almost lost a crank arm bolt when the cap screw started to back out. I noticed more aluminum showing between the motor and crank arm. I have now have enough blue loctite to keep the cap from moving. Pinch bolts...

$100 investment in tools would be enough to cover the average builder direct bike maintenance. Luna sells a ebike tool kit for $50 which is a great starter kit for someone new to bike maintenance.

I have not yet tried 750 watts setting. Maybe next weekend if the storm stays away. Starkey is a trail I do ride. Many tight twists especially through twisted pines keeps my speed down. About 15 miles is the entire Starkey trail and I like riding it in reverse. Most weekends I ride Croom. Most...

New problem I caught just yesterday. Slight creek while pedaling. After several months the Chainring nut loosened up. Good thing I had the Bikehand tool YC-29BB-2AN to retighten the lock ring in my toolbox. Not that I cannot handle the bike maintenance I can. I am just passing along my...

Ebay listing posted $400 https://www.ebay.com/itm/115561342217

First any errors on the display? Yes/No? Next, does the thumb throttle work? Yes/No? Next, does the pedal assist work when you pedal? Yes/No? Next, have you replaced any of the main cables on the bike? Yes/No? Has Juiced offered any ideas on the issue? They usually suggest replacing the main...

I have a Juiced Fast charger for sale. SOLD Purchased it 3 years ago and never really needed to use it. It does charge the battery much faster. $300 shipped if interested. Cycle Satiator 52v 8A Universal Programmable "Fast" Battery Charger

I had it for 3 years and decided it was time to sell. First ebike and it served me well. I also have a Luna X2 that I ride all the time.

With or without throttle on a V2 controller you can see 30mph on flat pavement. I have never run throttle only until the battery died. I would say 15 miles to 25 miles depending on the terrain. I have throttled back my v2 controller to protect the drivetrain. Check the box to allow Fixed...

Doing my bike check I found the rear thru axle almost came out. The screw that holds the handle came loose and I almost lost the handle. Thread locker and reassembled. Crazy I never thought the quick release handle could come off. Add that to your next bike check. The small allen head screw...

This is for a Juiced Ripcurrent bike. If this is for another bike they might not work. Ripcurrent rims are for 26x4" tires.

I am going to put the front and rear RCS wheels on Ebay this weekend. The rear motor is in excellent condition no issues. Less that 1,000 miles on them both. Wheels were trued by local bike shop last year. I sold my RCS and this is the spare set of wheels I had. Message me if interested. SOLD

To update from my last ride which was 15 miles and I had 55% battery left. Mostly trail and punchy climbs which is my standard ride. Level 2 PAS for flowy trails was great. Level 3 PAS was great for the more techy sections with a few short climbs. Level 4 PAS I did try on a few really tough...

My use of the x2 has been for trails that have been carved out of the old Florida Phosphate mines. I have been testing a few settings and wanted to share them. Most of my rides are in PAS 1-3 and when needed a little goose of the throttle. I have lowered my AMPS Max (Bike cfg) tab since I have a...

I wanted to start a discussion on the M600 v2 controller tuning. I have posted a few questions on the Luna Forum but did not get any responses. So I thought I would see if people who have a v2 controller can offer suggestions for tuning the v2 controller for different uses. I will repost my...