Search results

the bad part is you ahve to remove the valve and then reinstall it. I have really lucked out with tires that are easy to seat.

I have had a couple tires do that. I had to put a tube in inflate it then take the tube out leaving one side of the tire seated on the rim. then it would inflate.

I use these pails, they work for rollers and brushes. I bought ladder hooks so I can carry two up and hook them on the ladder so I don't have to hold them. Also bought the liners. Don't even have to wash the bucket, saves a huge amount of time

I toss rollers; they are cheap enough, even for good ones, or wrap them in plastic for the next day. I used a 4" roller that fit in the paint pail along with a brush held with a magnet. I had one for gray, one for the green, with hooks to hang it from the ladder. Did the whole house in a day and...

This is what it should look like the tape should just touch the sides of the rim. Yours looks like its over 1/2 the way up.

Got this airless sprayer for a job painting these big letters I made for a customer. But it put out so much paint that it was not practical. So it sat around for the last 3 years. I finally had to break down and paint the house. I debated on painting it and painting everything gray, but I used...

You have way too wide of tape. It should just be wider than the flat part of the rim. So far, only a few tires needed a tube; otherwise, my regular compressor or even my Makita cordless compressor have been fine. I have some Schwalbe tires that could be inflated with a hand pump and hold air for...

it is especially at high heat. but it also releases microplastics.

bulls is not great about warranty issues, they make you go to the manufacturer of whatever part breaks if its not the frame. I have three gen 2 and gen 4 bikes with no usses.

I thought about it, but the only two dealers, one was 15 or more miles away by bike, so not practical The other is a high-end shop, but you can only ride the bike around the parking lot so no way to test it. Plus with two bosch bikes I had batteries that would fit it.

saw someone having fun with junk.

Well, not sure you can blame Trek for your upgrades. That's a personal thing. Getting rid of the stock tires and going tubeless has made the bike a smoother ride. My bull's bike with a decent air fork is still a harsher ride. But this bike is not an off-road bike. but yes the cobi turned out to...

Someone had some fun with some junk.

That would be like using vice grips to remove a tiny sliver for what I am doing. hell, its leverage is longer than the actual part.

The nails hold the part in place while it is cut, but they lift up easily when done.. Then I can pull the nail out from the back, the nails don't have much head on them. There are a lot of them in that sawdust. I have a nail gun that shoots plastic nails that you can just break off. But they are...

I got the long guys for leverage. It makes the nails come out easily. I must have removed 500 nails today. I used to use flush cutters, but having those long handles makes a huge difference. I was cutting them off, but it leaves a stub. The new tool is actually less work to pull them out than my...

Yes better than ryobi. I liked the weight better than the Makita nailers. This gun I use to nail small parts down on my cnc router so they don’t come loose while I am cutting them.