Search results

That looks neat but I don't know if it would be able to run all those lights for as long as it's 12 volt battery. And I'm assuming I have to rewire all the lights or buy new ones with something that you call a USB

Honestly I don't know what that is. I've recently transitioned into the English faith and there's a lot of things that I don't understand simply learning how to use this phone was a pain in the butt for me. So I'm building the bike off of what knowledge I've learned and hoping for the best.

This is my bike build us far. It's been raining for 3 days straight now 4. I got bored so I thought I'd post where I was at on my bike build. I have completed my rear blinkers brake light and parking light. Finish my front fender installed a reflector as stated by law. I have a headlight also...

Good point @rich c , I drilled very small screw holes in the fork support. The bike is used to go to town on paved roads. 3-1/8" holes on top, and one on eitherside.

Update on the front fender, other than getting some screws. To fix it permintly its done.

But I will look into that for sure! Thanks again.

@J.R. you are always helpful, thank you for that. I have tested the electric system with the 12v and it will need to be charged probably every 3 months. The LED system I have on it takes very little wattage. And as you know I'm still learning how to do all this stuff. But I'm enjoying it as I...

I did post this earlier on another form in here. I apologize I cannot figure out how to delete that one. Anyway this is what I have at this point. Hopefully next month I will be purchasing my rear 1000w. System and a 20 amp hour lithium battery pack. I am integrating a 12-volt motorcycle battery...

It's pretty simple. But if you have a hard time and have little knowledge of that area you may even be able to pull up a video on YouTube how to put a front tire on a bicycle.

Sorry Forks not hub.

Does it have disc breaks or pad breaks that lock agents the wheel? Either way its pretty simple most likely a 5/8" or 15mm to remove the 2 nuts on the hub, one one each side. If its disc you should be able to gently slid it out, if its pads, I would just remove one of the pads off. It should be...

Hopefully next month I will be purchasing my rear 1000w. System and a 20 amp hour lithium battery pack. I am integrating a 12-volt motorcycle battery in the middle of the frame which still allows me to Pedal. This will run my LED headlights blinkers brake lights and parking lights. I have...

It has been asked before many this will help, good luck and have fun! https://electricbikereview.com/forums/threads/help-me-decide-rad-rover-vs-rad-city-or-something-else.13501/

That's exactly what I'm doing with mine. Running a LED brake light parking light, LED blinkers and a and I LED headlight all 12 volt. I have already taken a template and Mark out where my motorcycle battery will go into the frame, obviously the 48v battery will go on the back tray. I've already...

@J.R. @AguassissiM ... figured I might as well get started on this thing I did have a thumb brake light on The Handlebar but I know the throttle has to go there so I relocated the brake light to the front disc brake arm. All's I did was put a toggle switch there which will run electricity to...

Ok looks like I will save up for the 20ah lithium set up then. However since this goes to 48 volts instead of 12 volts x 4 I have to come up with a different design for a generator for the battery. One problem solved another one pops up. Thanks guys

Oh who! So the lithium 20 amp hours are equivalent to 35 amp power acid batteries? Is that what I'm reading correct?

I already have a off road bike and i need at least 750w hub minuam living in the Mountains. And China is a gamble, IV been told 50% of there stuff is bad on arrival and you can't get your money back. I also have made some mods, to the bike I have. And this way I know what I have. But thank you...

Thanks AguassissiM.. Just wondering any experience with the 2 set ups? My neighbor told me he know a guy in California that sold the 48 volt 20 amp rear deck battery for 450 dollars it weighs 15lbs, further studying on the other batteries they are 35ah but only 252.00 delivered the down fall...

@J.R. or @AguassissiM another question should I go with the (4) 35Ah deep cycle batteries total of 48lbs and 270.00 delivered. Or this thing more money less AH but more then likely lighter but its lot higher in price, also from China, not sure if its a good unit...