Search results

  1. Y

    Finally a rival of Juiced? Surface 604 Shred

    The Ride1Up looks nice & I can see juiced going with a similar system eventually, but no torque sensing is a deal breaker & what makes Juiced unique.
  2. Y

    Is the Bafang motor used on the Crosscurrent line customized for Juiced?

    Well at least your bikes will last longer! Anyway grin replied with "If you change out all the motor phase, halls, and speedo connector to one that matches what is on your controller. " So I don't know if the pins layout of Juiced matches with what Grin offers. Assuming the motor just needs a...
  3. Y

    Is the Bafang motor used on the Crosscurrent line customized for Juiced?

    I did short the mosfet controlling the light switching shortly after I got the bike, but never noticed the generator behavior till recently. Rolling the wheel both ways powers the light with battery off. I only suspect a bad/locked clutch because at around 5k miles I had been experiencing a...
  4. Y

    Is the Bafang motor used on the Crosscurrent line customized for Juiced?

    Just emailed them asking if they have anything compatible. Have you done this swap yourself? Assuming/hoping I don't have to change controllers too.
  5. Y

    Is the Bafang motor used on the Crosscurrent line customized for Juiced?

    If not anyone have a a source to get a replacement motor? My CCX wheel likely has a clutch problem (acts like a generator powering the lights even when powered down) though it still works & the rim is cracking at the nipples. I've gotten over 8000 hard commuting miles on it so these issues...
  6. Y

    Known Issues & Problems with Juiced Bikes Products + Help, Solutions & Fixes

    Discovered this a few months ago when swapping back to the stock forks on my CCX. If you ever want to replace them check the axle diameter. Standard size is 9mm and my CCX came with a 10mm axle. I used it with a retired Rock Shox fork not realizing this because it would still fit in 9mm dropout...
  7. Y

    Received my latest batch CCX from Juiced Bikes...

    If you ride in rain there will be grit & debris & in winter you get salt slush. I just bought some to install on a new fork that'll replace the stock fork. I'm hoping they'll work to keep crap off the stanchions & not retain liquid.
  8. Y

    Pannier bag recommendations

    The Rock Bros seems to be a copy of the Topeak rack trunk that has been around for awhile. I bought one this year to replace an similar style axiom bag that was falling apart after a year. I got their strap version as opposed to the quick release for their racks. Fits very well on the CCX rack...
  9. Y

    Yet another CCX owner

    Got my CCX December. I'm a masher & got an estimated 1200 miles for the OEM chain & estimated 4400 miles on the replacement chain (KMC x9.93) which finally had to be replaced this month. My brakes don't wear evenly either. They seem to lose their self centering as the pads wear. I thought they...
  10. Y

    Which Brooks Saddle?

    I stuck a Brooks C17 Carved on my CCX soon after getting it in December. I've found it comfortable after thousands of miles since then. The only issue has been creaking coming from the saddle when the ride gets rough. Tried adding some grease to the front rivet/saddle/rail interface at the...
  11. Y

    The JUICE GRIND

    https://hilleater.ca/bafang-swx02-motor/ I have already taken apart the motor from my CC so I know what to expect & already have the clutch assembly bought from Ebay on hand. When I took it the CC motor apart the gears looked fine so if it's a mechanical issue then likely inside the clutch...
  12. Y

    The JUICE GRIND

    This grinding noise is an odd problem. I started to experience it around 4k miles and over a month ago thought it was gonna die soon, but it's still going & only once since then have I heard the grind. The wanted me to return the wheel then too, but considering the shipping cost I bought a...
  13. Y

    READ BEFORE YOU BUY: No replacements parts

    While I did get corrosion un Yea I might go with booties when I decide to buy the fork again. I did get some corrosion in the legs near the seals, but the main concern was at the dropouts where they wheel nuts grip the fork leg. I think the axle nuts cut through the paint & then road...
  14. Y

    READ BEFORE YOU BUY: No replacements parts

    Well the forks they use are low end so I wouldn't expect much in term serviceability and that would mean any other brand using the same model would have the same trouble. If it's in warranty I would expect them to replace the whole thing. I bought a $260 Rock Shox air fork to replace the stock...
  15. Y

    Update: fixed! (re: Frustrating Juiced experience new CCX)

    With the battery on & holding the display power button down maybe try massaging the wire harness (the bundle of wires that connects the display to controller) in different spots to see if there's any reaction.
  16. Y

    Update: fixed! (re: Frustrating Juiced experience new CCX)

    Likely the same applies to the CCX. From https://www.juicedbikes.com/pages/52v-vs-48v-battery-packs-faq What is the difference between the 48V and 52V RipCurrent S? The ONLY difference between our 48V and 52V bikes is the battery pack. The batteries are interchangeable and the controller is...
  17. Y

    Juiced ccx review and mileage question

    I average around 400wh for 16 miles in level 3 & S. The speed is addictive plus I ride on suburban roads with 45mph limits so it helps me feel a little safer. The range would probably more then double if you keep it under 20. Had the Satiator since Dec about the same time got the CCX & these...
  18. Y

    Winter tires

    Which sized W240 do you use? Wondering if the biggest 54-622 would fit.
  19. Y

    Winter tires

    I am currently using Marathon Winter Plus, but looking to try Nokian W240 for their knobbier thread since the Marathons don't have much grip in packed snow/slush.
  20. Y

    Has anyone replaced the clutch gear assembly on their CC(S,X)?

    I actually did strip the screws on that motor & had to dremel a slot to get it out using the impact with a flathead. I'm just hoping that the issue is actually the clutch/gears since more googling has brought up a forum that talked of the issue possibly being frayed wiring too. Wish I bought...
Back