Search results

BBSHD has a torque sensor?

They're Deore so they'll work perfectly. Actually, pretty much any Shimano lever will "work" with any caliper since the outside hose diameters are the same (5mm), and that's that the olive attaches to. Some levers/calipers were designed for the smaller inside diameter hose, some for the...

As a result of an off-board discussion, here is some additional information that might help you grok the Delta Voltage table. It's a different enough way to think about it that did some edits to the first and tenth post in this thread. While the table is laid out such that the input is pedal...

FWIW, I believe Parallels works well on the ARM-based Macs for Windows emulation. I personally still have the last Intel-based MBP on which Parallels works perfectly - I have two Windows only apps that use COM/USB ports to connect to hardware and assignment/use is quite straightforward.

For a single, the 1UP is probably fine, but for 2 bikes there are issues using the ramp for the second bike. Also, if your axle to axle distance is too great, you have to be sure the arms are ALL the say down, and even you've got to lift quite a bit above the tray. And the locking mechanism...

Previous discussion here: https://forums.electricbikereview.com/threads/sram-eagle-powertrain.54229/

I'm kind of excited about this. I've done a lot of Bafang Ultra tuning, but in the end what you can do is limited by the motor's controller just being ignorant of what's going on with the rest of the bike. Knowing more about what gear you're in and being able automatically choose gears given the...

Note the diameter in most displays is not the actual tire diameter, but the nominal wheel size OK, so a 29" X 2.3 would give you 2326mm to 2330mm. That's off by only 1.1% Some charts: https://www.schwalbe.com/en/reifenmasse https://www.cateye.com/data/resources/Tire_size_chart_ENG_151106.pdf

Surely you can choose a different "stock" size on the display. I'd play around to see if a larger stock size ends up with closer approximation of your tire's actual circumference.

And another data point: I ride 2 piston Shimano MT400 brakes and they're just fine. My wife rides 4 piston Shimano BR-8120 (Deore XT) and they brake well, needing slightly less level pressure. The Deore's also have finned brake pads, which is supposed to help cooling. I'm about 190lbs, bike is...

Quick Start: Over the past several months I've had requests to post my settings. I haven't done that for the obvious reasons that my bike, my setup (ludicrious congroller, EggRider), myself, and how/where I ride are almost certainly different than anyone else here. For instance, I suspect...

I used the center hole on that mount to put a bolt through the spot where the rack's reflector used to be. But, yeah, there are a whole bunch of mods you can do to the plastic to adapt it. And the light itself comes with a post mount that's in two pieces, so if you have a left to right bolt hole...

Cheap lights aren't worth the risk, IMO, since the whole point is your safety. I'm happy with the Cygolite products: https://www.amazon.com/gp/product/B07W62CCL2 is $48 and you can buy an additional mount like this: https://www.amazon.com/gp/product/B009VUB0Q8 for about $7

These are the main reasons I haven't posted my specific settings. They don't apply to different bikes, different riders, or in different riding environments. I think the matrix of such differences are so great that it becomes really hard to have a set of "stock" settings from which to choose...

Seems like you think the chain broke first, and that set off the subsequent events. But, don't chain breaks simply unravel from the gearing? Does the tensioner look like it got hit? In terms of chains, it's too bad a single speed chain won't work, because those have full bushings for increased...

Just a note that I updated the first post in this thread with: 1) A new screen grab 2) Some findings on trying to set PAS 0 to the lowest possible values. 3) A note on why my screen grab show 2 magnets when I only have 1.

After bleeding brakes on various cars over the decades, I was surprised to discover the hard way just how different bleeding bicycle brakes are. The first culprit is that the inside hose diameter is very small. With Shimano, they decided to make the newer BH90 hose inside diameter smaller than...

As long as you're applying more than Start(kg) pressure (in the SPD0 column) and the crank is rotating you should be getting motor output at least at MinCur(%) levels multiplied by the Limited Current(%) setting of the PAS level you're in. Crank rotation is detected with internal magnets and...

Have you reached out to Evelo to ask them about changing the default PAS level percentages? Evelo claims to have special programming to raise the max power from 600 to 1200 watts. Maybe they can give you a VESC program to reset the levels to be lower.

I do that with the EggRider all the time. Just because you've connected your phone doesn't mean you can't use the physical buttons on the EggRider.