Search results

Fazua Ride 50 Evation, energy 250x battery, firmware version 2.12. Remote b firmware version 2.01. Ran diagnostics in Fazua toolbox version 2.18; no errors detected. Symptoms; all the ‘state of charge/support level bars’ on the display bar go very dim and the white lights surrounding the ‘up’ &...

Hah! After a couple of weeks of the display issue described in my previous post, I've just checked again and got the page attached here! It's mysteriously re-populated the device updates page. o_O

I had an e-mail from Specialized on Feb. 16th, urging me to get the latest firmware update with the charge limit feature. Please note my, and others previous comments about updates on this thread. I'm just curious however to find out if anyone knows why, when I log in to mission control and look...

I've heard back from the retailer; " Basically, when the rim is made it is just one long piece of metal rolled up to form the rim. It is then joined together with 2 interference fit pins on the inside (which you cannot see) On the more expensive rims this joint is then welded and smoothed down...

Yes it's the rim seam, directly opposite the valve. I can feel the seam of the rear wheel by running my finger over the same spot, opposite the valve. But the rear seam is not visible like the front one. Never seen anything like this before.

Just noticed this crack or scratch on both sides of the front rim of my bike. Less than a year old with only 450 miles on the clock. I've contacted the retailer to ask if this needs attention or is just cosmetic. What do you think?

https://electricbikereview.com/forums/threads/handlebar-mods.812/#post-537489 Most handlebars far too wide for most of us. +2 on the pipe cutters, but make sure there will be enough space for your handlebar furniture.

Bump!

Did you ever work out how to do this? Also, when you say downtube, do you mean top tube? On my Fazua Evation, I'd like to change my "remote b" to one that will turn on the battery(250x) without having to disconnect and reconnect the battery pack before every ride. According to the fazua webpage...

Surely, it's just the derailleur doing the clunking? Why do you think it's the motor unit? If you don't turn the pedals, no clunk you say. Do you change gear whilst freewheeling? Sorry for what might seem an unhelpful response, but I'm fascinated to understand what's happening!

Although this bike is marketed as a cross country mtb, it comes with a ridiculously wide 800mm handlebar. I'll struggle to get it through the doorway of my garage, between trees, or even safely past traffic on our narrow lanes. I'll be wanting a narrower bar, but can't find any spec online from...

Yeh, like I said before, MC said it was a 'display update', the bike shop guy spoke better english than I do french, and I understood him up to 'it's a display' update, but he seemed to be saying something about the message being sent by the display unit was more accurate. Either way, it does...

Well, I never bothered with the vile journey to get the possibly pointless update, but.............I find myself at the foot of Alpe d'Huez for a couple of weeks, great rides on the fantastic bike, wander into my favourite LBS in Bourg d'Oisans and casually mention the firmware update, they take...

It may well be 'normal and modern nowadays' but I don't agree that it gives you 'excellent steering capability'. Quite the opposite in fact. The increased leverage causes instability and wobbling, as well as causing problems with getting through narrow spaces. 680mm is ridiculously wide and of...

After 60 years of light weight, made to measure road & mtb racing bikes, I'm pleased to now be riding a Turbo Vado SL 4. It's perfect, but for one thing; the ridiculously wide 680mm handlebars! I can barely get it through my garage door, garden gate etc. I was going to saw off 100mm, but...

+1. After 60 years of cycling I'm new to these wonderful e-bikes, but have been disappointed by the LBS (more than the nearest, all of them) lack of knowledge, and inconsistent messages, eg; the update you need is about torque settings. Mission Control says it's about 'display'. I'm all for...

That would be illegal in Europe; you would need a light board and number plate displayed.

Nothing in the user manual, but does anyone happen to know what the torque settings for the through axles should be? When I got my Sirrus Elite Carbon a few years back I had to e-mail Specialized, and was surprised that the torque setting for the hex key should be 15Nm. That's pretty tight! The...

I agree! I'm just curious about things though, and would love to know what this display update is supposed to do, especially as it's a TCU, not TCD on my bike. The LBS (25 miles away!) guy I spoke to said it was something to do with the torque settings, although mission control shows motor &...

Thanks BioWheel, I have the same thoughts, but the trouble is I don't know what exactly the update to the display will actually do! On the one hand I figure that Specialized wouldn't release new firmware unless it was actually important, but at the same time suspect it won't do anything...