Search results

Follow up question: the bike has a Julet 1 to 5 (9pin) connector for the throttle, brakes, display, light like this below. I am looking for a controller that is compatible for that type of connector, can anyone recommend a 500 watt controller?

The bike has no pedals, so it’s all throttle only, but factory setting has it at 5.

For 6 street blocks of 11-12%, I really dont know how long it would take the bike to climb, maybe more than a minute or less, barring stop signs ahead… it will make the climb, but I will have to dime the throttle… I usually set the bike to S mode for more torque and accelaration when I am about...

I never measure how how it takes it to climb up a 11-12% grade… it usually able to do 14mph on a first street block going up, then it would drop to 11mph on the following blocks… I live in SF where it could be a smooth gradient and then super steep… I am in a neighborhood where there’s about...

An addition 3 mph would be more sufficient for my need… Hearing and feeling the 350 watt motor somewhat struggling to maintain an 11mph climb and I don’t want the motor to fail halfway.

Replacing the motor would be the better option? I just need something for power for steep uphill. 350 is adequate but it loses power and torque when the street is at 12% grade.. it drops to 11mph. I am looking for something that can maintain at least 14mph on a climb....

The display is “EN06”.. I found something similar at aliexpress which includes a controller… the max output on the controller is 19a..

Thank you for the feedback. Will look into that before getting a motor.

Thanks for responding.It says "JYLT 48v 350 Watt"... The bike slows down to 11mph when climbing an approximately 10-11% grade.. the 350watt is pretty zippy on flat level street, around 20mph (I'm only 130lbs)... I was initially looking for a 750 watt hub motor, but I couldnt find anything that...

Hello. I have a Stigo B1 with a 48v 350 watt hub motor. I am considering upgrading the motor to 500 watts since I need an extra torque for slightly steeper streets. Can I just swap the motor or replace the controller. The controller is "generic" as it doesn't provide much info. But here are the...