Search results

Hi Neil, First I like to mount it as I got no time left over to try it out these days I don't share something not tested and working. After I checked , I let the community know and who PM's me I will send it by mail it is only 312 Kb. Also think about that the middle position, maybe not the...

@gtawest &David1 Glad to help? Maybe combine the Loctite and Bondic, as when the Loctite get too much stress you can't go back, Loctite don't let you do the trick twice , so make the stress divided by 2 systems. Devide by 3 with glueing some reinforcement on the crackline if possible. I...

Made a keyfob today with dual color/layer Base=black Top=luminecent It need some improvement but only the first attempt Final version

As I mentioned in a previous post I made a des!gn of a infill spacer as I noticed this afternoon while cleaning the bike the rear fender was not aligned. in the middle of the rear tire. I made 2 with the hole in the center as this is my setting for the middle. The des!gn is easy to change for...

Look at the UV-glue Bondic

Welding is a drastic solution maybe design a fill-in with a 3D printer is maybe a option?

There is too much play between the bat and de housing that will make the bat to move in the housing and make some marks on the touching points. I des!gned a cap and the 3D printer did the rest.

Something new Spurcycle Bell

Some nice mirrors from a French company Zefal http://www.zefal.com/en/19-mirrors The one from ST2 maybe (Link Removed - No Longer Exists)

Project progresses As there still is a design issue on the batterydoor: can't be closed properly while battery is not inserted, riders closed the door with velcro, tape, ducktape, rubber band or other what i found not convenient. Befor des!gning a solution I had to find out why the bat was...

Not much to find specific for Magura MT2/4 This could help but not shure sometime better info from other brand than nothing (Link Removed - No Longer Exists) http://www.ebike-solutions.com/de/shop/elektronikzubehoer/e-brakes/magura-bremsabschalter-fuer-hydraulikbremsen-fuer-bionx-oder-ebs.html...

I have some toughts about the neoprene insulation cover as the most cold will be transported from the "naked" aluminium frame, of course it will help but effective ?????? Something to think about, maybe someone have an old surf/wetsuite, laptop bag to refit and give it a try? Busy project(s)...

This weekend had some time to produce some accessories, gadgets: Please share yours Stromer T shirt Vinyl frame protector (chain) Magura brake handle pin extractor (no picture) see: Already made a charger wall bracket see...

Now my wall bracket design is finished i will spend some time design the bat dummy and keep in touch with the progress of work.

The prototype wasn't as functional to remove the charger from the bracket when needed on other places, changed design, now the charger can easily removed from the bracket without tools.

I'm tinking to design a small battery dummy top with (fixed) handle to close the door as the handle is needed to hold the dummy in place.

After 10hrs printing this came out of the box

After full charging the new ST2 battery (only second charging) the display showed n/a as info on the screen, also no assistance was available (would be a hard ride home) I had to remove the bat and everything seems ok till now. Other ST2 riders experienced something like this?

Someone already made a wall bracket for a ST2 charger, as I like to mount the charger on the wall next to the wall plug. Ideas are welcome befor I designing something for the printer?

I picked up my new ST2 yesterday and ordered a Ortlieb office bag QL 2.1 with laptop sleeve, this will solv the laptop problem.