Search results

I have peddled a Scrambler many miles and find it to be very good. I do suggest, however, to upgrade to the next larger cassette for a slower, more comfortable cadence. A much recommended improvement!

I purchased a small bottle of touch-up paint directly from Juiced for $5.

Thanks for the reply Andy. Good to hear you like the Jones bar. The reviews seem to be very positive. Putting on a longer derailleur cable should not be too challenging. Park tools video clearly detailing how to do this.

Hi Chris. I will likely get the longer stem, as you say. The horn is quite loud so should suit your needs. I am also looking into the Jones riser handlebar for a more comfortable hand position. https://www.jonesbikes.com/jones-sg-2-5-aluminum-loop-h-bar/

Hi Brian. Thanks for the reply. Clean looking mount. My only concern may be water access to the USB plug hole. The RCS unfortunately has a very short handlebar stem, leaving no room for the horn clamp. Juiced should include a modified horn mount to fit the RCS.

I am trying to find a good place to mount a Juiced horn on my RCS. There is room at the top of the steer stem on the CCS but not enough space on the RCS. Any novel ideas out there? What do you do with all of the extra horn button wire? Wrap it around the handlebar... looks a bit messy. If I...

This Class 2 sticker came on my (52V 19.2Ah) RipCurrent S. My wife's Cross Current S (48V 19.2Ah) has the Class 3 sticker :-(.

I used a mechanic's stethoscope to listen more closely. You likely know this... if you don't have a stethoscope, you can use the tip of a long screwdriver placed on a fixed spot close to where the sound seems to come from. Place the end of the handle on your ear and listen.

Hi Klee. Is the sound coming from the cassette area on my RCS similar to the sound yours is making? See attached video. 5165_after_30_…nute_ride.m4v

I will check with Tora and post back if I find out the color. Thx Angela

Thanks Timpo. Good explanation.

Thank you again Timpo. I have the 48V 19.2A large battery on the CCS so it is identical in size to the 52V on my RCS. I use a GRIN Satiator to charge the batteries. Would you have any idea why Tora went to the 25A controller on the CCX? I have heard the 650W Bfang motor on the CCS is the same...

Thank you Timpo. So I can switch the 52V battery from my RipCurrent S to the CrossCurrent S with no downside? Could this cause any damage (ie: overheating) to the 20A controller on the CrossCurrent S? Void warranty?

Questions re: 48V 19.2A CrossCurrent S and a 52V 19.2A RipCurrentS. Is the LCD Advanced Matrix display used on the 48V CrossCurrent S identical to the LCD Advanced Matrix Display on the 52V RipCurrent S? If not, what is the difference? Will the 52V battery pack from the RipCurrent S work...

I have a few chips on my Red RipCurrent S. Would anyone happen to know the paint code/color? Thank you.

Thank you Timpo, for your reply. Excellent video. Will a 48V Advanced display read correctly or will I have to upgrade to the 52V Advanced display to get accurate voltage, etc. readings?

I was questioning which display you might have. A 48V Advanced display and a 52V Advanced display are available. I take it then you must have the 52V version. I also have limited knowledge in this area. I have many questions about what goes with, and will work "properly" with, the various 48V...

Did your kit include the 52V advanced display or the 48V? If the 48V does the voltage read correctly or is it pegged, if one can use that term for a digital display?

Would it work to pair the 52V 21Ah battery with the 52V controller or would the52V 19.2Ah battery be better?