Search results

Just thought I would mentioned coming soon by Voltbike Trio, guess similar pricing as Yukon 750 but has not been announced yet. Great on grass, gravel, snow and and sand. Trail riding might not work that well.

Think Voltbike Yukon is the one you should be looking at not the Elegant for off road. Also rated at 320lb. You would want the frame that is 2 inch smaller which they call the 17 inch which is not on there website to often but you could call. This bike is really close to Radrover so either...

I received a reply back from Nanjing Lishui Electronics "the controller can take 25Amps peak and around 12amp continuous". That is what I was looking for (and thinking by looking at it) and hope this help others that want to go up a little on amps. I think I will try 20 for a while and see if...

I sent a email and received a reply back saying you need to ask VoltBike, he was not going to say anything more than what it shows on the label. Thanks Ryno for the response, I think it will run 20 amps all day also but that little unknown if one part on the board is going to cause me a...

Thanks PCDoctor, I did not have much luck either on a search. I read all the stuff from ace20ri on here and was hoping for him to chime in and you. Default is actually 15 straight from Voltbike sent to US, I went up one. Interesting article that shows the similar Radrover with a similar but...

Update: Took a few pictures of inside and outside of controller. Inside has been sealed against water so not able to study any parts. Still shows 20 AMP max but low volt cutoff is 40v now instead of 41v. Seems pretty heavy duty with the heat sink and all but still not sure if I want to push pass...

I have been looking for any specifications on the controller in Voltbike Yukon 750 2018 edition which has LSW 1106-58-10F instead of the LSW784-45-3M pictured below. This is likely the same controller on many bikes here including the RadRover, China supplied. My bike is brand new and have not...

Thanks for the reply but HAL setting and ASs (assistance?) Are two different things. Yes cadence sensor that move when you pedal has 12 magnets so you set ASs to 12 but the HAL is the magnets inside the motor which will be 6 according to four different bikes being checked. My bike was the only...

When I spoke with VoltBike I asked for the model number of the controller in the latest Yukon 750 2018 05-2018 Shipment . He had one right there and read the number to me. Model given was LSW1106-58-10F the old one was the LSW784-45-3M. I am having trouble locating any information on this...

I just spoke to VoltBike again (Alex), he took the time to check two bikes and they both had the HAL set to 6. I think when i asked George he was thinking cadence sensor for some reason. I am going to stay with 6 because seems to be a consensus.

RadRover very similar would you happen to know your HAL setting? Either 6 or 12 (was 1 at one time) , I think it is the smaller magnets inside the motor that are glued to the housing if you pull the motor apart. I watched a VoltBike video that George did to show how to glue them back on if you...

Yes I have the 19 inch frame, I am 6 feet with a 31 inseam and think I would of liked the smaller frame. When we say smaller frame it is just the bar angles down more from stem to seat post and it does not come with the water bottle. Bike will be the same dimensions everywhere else. That...

I do not see 750 written anywhere on motor, had bike less than week.

VoltBike Yukon 750 Limited 2018 Edition Fat Tire Owner Review I ordered on May 27, 2018 and added a second bike to the order on June 1, 2018. I live in North Carolina. Both bikes arrived June 27, five days past estimate. Original order was for son and then decided Dad wanted one also. I...

Thanks PCDoctor, detailed specifications seem to be difficult to nail down. Just found that my son has his HAL set to 6 so back to being unsure which is correct. Just hope George was not thinking cadence and mixed the two up. Anyone else want to say what they have from the factory. I have...

I just called George at Voltbike and he confirmed the HAL is 12, called a second time and now 6. Also mentioned to me the controller is a little better but did not add any additional information. If someone wants to open that up and share that would be great. Yes that is the controller in...

I was able to get my second bike out of the box and all seems well. Powered up and no scratches, to late to go for ride. Only question I have is the controller moved to the box in the picture below? Has anyone explored to see if it is a better controller? I notice the HAL setting is 12 not 1...

SuperGoop and Ace20ri were providing a lot of information in this thread https://electricbikereview.com/forums/threads/new-voltbike-yukon-750-spotted.8120/page-6. Found it a good read, could start from beginning or around post 100. Wheel size was set to 28 on new bike received this week but...

I hope the tire stays on TXDego, what pressure were you running?. I had this from a separate thread and think they still apply, if someone would confirm that would be great. There was also talk at one point about the controller and changing resistor to support higher current but what more...

Thanks for the tip. I plan to go over the bikes this weekend when I have some time and check everything out. Comments like this help so many people, again thanks for taking the time.