Entered My First Gravel Race........with the Frey Beast

juggernaut1

Member
Region
Australia
A friend of mine mentioned he was participating in his first gravel race with his Amflow Pro. I had a look at the courses which varied in distance - 25klm, 49klm, 90klm and 125klm.

I entered in the 90klm race with 2025 vertical metres of climbing as I thought this would give the greatest personal challenge and really test out the Frey Beast. This also happend to be the same race my friend entered with his Amflow.

I only had a few days to prepare for the race and strapped on an additional bottle holder on the top tube and changed out the Magura rotors and pads for new ones. I left everything else as is.

The gravel race had over 2,000 competitors over the four distances and there were 436 cyclists in my race. The 125 klm race drew the largest contingent and included cyclists from all over Australia and some from other parts of the world. This race was also enable cyclists to qualify for the UCI world gravel championships which were being hosted at this location later in the year.

The 90 klm course also formed a majority of the 125 klm race. There were staggered starts for the various distances and ages. I was in the last group to leave, but were mixing with the 125 klm competitors further up the track.

Given I had never ridden the Beast 90 klm neverlone including 2025 of vm's I had no idea whether I or the battery would last the distance. I did the vast majority of the race in Eco 1 with Eco 2 used half way up a few climbs and Eco 3 with about 3 klm's to go. I crossed the line with 20% battery remaining! I was quite surprise how the big Bafang Ultra motor sipped away at the battery, even more so that I was running a tubed setup with the Schwalbe Radial Alberts Pro's in a gravity casing 27.5 x 2.6 (rear) and 29 x 2.6 (front).

Some of the downhill sections were quite fast and I reached rolling speeds approaching 55 klm/hr and was generally able to keep pace with the traditional gravel cyclists. I mainly lost ground on the straights and fast uphill sections against the faster traditional gravel cyclists who were riding in groups taking turns at the front whereas I was riding solo. I was able to make up some ground on the steeper gravel climbs.

The race certainly took a toll on my body. At around the 42 klm mark I stopped to refill my water bottles and could hardly walk to the refill station then suffered a leg cramp when I got back on. All in all it was a great personal challenge, I also had a lot of fun and would look forward to competing again next year.

My only goal was to finish the race........but to my surprise I actually won the ebike category!!

I also finished 114th outright out of the 436 competitors, and 12th in my age group (55-59).

In case you were wondering, my friend with his Amflow finished over an hour behind me with 3% battery left.
 
Last edited:
Nice work! I have been considering entering a gravel ride or two, but I just have not got around to it. You are making get off my butt, well maybe :)
 
Thanks.

Just do it! I did see a couple of more gravel comps coming up later in the year. I'm sure your used to more seat time than I am, so a continuous four hour ride is probably nothing for you :)

I may also enter some single track competitions later this year as well, such as the Dwellingup 100 and the Cape to Cape (4 day event).
 
Last edited:
Congratulations Jugger! You are doing what I'm doing now and I'm glad to hear about your experience!

Starting in eRide100 in Sudovia Poland today at 10:00. I have a strong competition this year, could be the last on the finish line!

(please write km not klm, or it hurts my eyes) 😭
 
Congrats on the win. The Schwalbe Albert radials are outstanding competition tires. Our MTB race team guys swear by them.

The new Amflow bikes with the M2 motor are starting to come available in large size only.
 
Well done!
A property tuned Ultra is very efficient imo. I average around 9Kw/mi and have achieved as low as 7Kw/mi and this is in an area with a lot of hills. And when you want a beast, it's there too with what seems to be an unlimited amount of torque.
This motor is so much fun!
 
Well done!
A property tuned Ultra is very efficient imo. I average around 9Kw/mi and have achieved as low as 7Kw/mi and this is in an area with a lot of hills. And when you want a beast, it's there too with what seems to be an unlimited amount of torque.
This motor is so much fun!
Mine just has the factory Frey/Bafang tune with the CANbus motor.
 
Congrats on the win. The Schwalbe Albert radials are outstanding competition tires. Our MTB race team guys swear by them.

The new Amflow bikes with the M2 motor are starting to come available in large size only.
They are great tyres, but for this race the bike felt over tyred and draggy for a higher speed and less technical gravel race.
 
Mine just has the factory Frey/Bafang tune with the CANbus motor.
From what I understand they are doing a much better job with the factory tune on the CANbus motors as of late. I'm sure the 60V of the Beasts is an asset to efficiency as well.
That said I truely appreciate the UART personalized tweaks I've made. I have as little or as much assistance as I want, when and how as desired. I've also opted for a display that allows for 9 straight PAS over the 5/5 PAS of the Eco/Sport version.
But hey... no sense fixing what ain't broke.
 
From what I understand they are doing a much better job with the factory tune on the CANbus motors as of late. I'm sure the 60V of the Beasts is an asset to efficiency as well.
That said I truely appreciate the UART personalized tweaks I've made. I have as little or as much assistance as I want, when and how as desired. I've also opted for a display that allows for 9 straight PAS over the 5/5 PAS of the Eco/Sport version.
But hey... no sense fixing what ain't broke.
The 60V Beast also has a lower 28A controller compared to the usual 30A Ultra controller. So more volts and less amps likely also helps efficiency …..and less heat.

In theory I prefer your display, but the reality is I ride on eco pas 1 everywhere regardless of wind, terrain, or elevation. So the type of display becomes a moot point. Although I did up the pas on occasions in the gravel race as mentioned.
 
Thanks.

Just do it! I did see a couple of more gravel comps coming up later in the year. I'm sure your used to more seat time than I am, so a continuous four hour ride is probably nothing for you :)

I may also enter some single track competitions later this year as well, such as the Dwellingup 100 and the Cape to Cape (4 day event).
Which race did you enter?

My thinking is to do it with my son, who rides an analog Canyon Grizil 6. He is still building up his kilometres, so 60 km would be the ideal distance at first.
 
The 60V Beast also has a lower 28A controller compared to the usual 30A Ultra controller. So more volts and less amps likely also helps efficiency …..and less heat.
100% on the higher voltage and less heat being a factor with efficiency.. but the lower current really only facilitates hardware protection. The only way it would play any part in efficiency is if you maintained it right at that limit and I'm guessing riding mostly in Eco 1, that's not happening. Not to mention that would be one hell of a death ride. That said I lowered my global current to the same 28a max, but again only to add a little additional hardware protection.
In theory I prefer your display, but the reality is I ride on eco pas 1 everywhere regardless of wind, terrain, or elevation. So the type of display becomes a moot point. Although I did up the pas on occasions in the gravel race as mentioned.
Now that doesn't make sense to me. How can one of nine PAS be usable for all situations unless it's (in my mind) overpowered?
Of course a lot has to do with where and how you ride and what's expected as far as assistance.. but for example I have my PAS 1 tuned so low it's barely noticeable. Great on a flats or slight downhill allowing the use of a higher gear (more speed) and only get about 50w of feathered help without having to vary pedal pressure. PAS 1-4 are tightly spaced just giving slightly more assistance than the previous and is great for maintaining your desired cadence on ever changing terrain and ride resistance. PAS 5 - 9 you really get to feel the power and make flying up hills a blast. I typically don't use all 9 on any given ride, but 6 for sure, even if only briefly.
Now my bike is in the SUV class.. and no Beast, that's for sure. And I wouldn't even think of competing with it. But in my use being able to take advantage of 9 PAS options and having exactly the amount of assistance makes the bike feel very personal.. and as aforementioned, very efficient.
These Ultra motors are very versatile.
 
Back