TPEHAK's latest activity
-
TTPEHAK replied to the thread Kindernay maintenance..Alright, I figured it out. You need to attach the cog, rest it on two pieces of plywood, put an appropriate diameter socket on top of...
-
-
TTPEHAK replied to the thread Kindernay maintenance..By the way all the custom plastic parts in this gearbox are 3D printed parts. For instance this black part looks like FDM 3D printed...
-
-
TTPEHAK replied to the thread Kindernay maintenance..This is how far I was able to disassemble it and stuck. It looks like there is a plastic ring sitting deep in the bore needs to be...
-
-
TTPEHAK replied to the thread Kindernay maintenance..I might be able to fix it. I opened the case and I see nothing disastrous yet. Here is how to open the gear hub. Clamp the brake rotor...
-
-
TI'm using a Rohloff with my naturally aspirated 1000w Ultra and so far so good. 4000mi on one and 2500mi on another. 3x3 borrowed the...
-
TTPEHAK replied to the thread New High Torque IGH announced by 3x3.My Kindernay VII is over. Placed order on 3x3 with Vapor Propulsion Labs. Where I can find the 32 spokes 12x148 mm through axle hub...
-
-
TTPEHAK replied to the thread Kindernay maintenance..Welp, My Kindernay VII is finally broken. I did 30 mph in light uphill on my Bafang m620 with 3000W Innotrace controller, everything was...
-
TTPEHAK replied to the thread Archon X1 Programming Thread (questions and experiences).Here is how you can connect VESC Express to VESC for Bafang controller. Here is the parts list: 1) Some PHB 2.0mm crimping terminals...
-
-
TTPEHAK reacted to Ravi Kempaiah's post in the thread New High Torque IGH announced by 3x3 with
Like.
We are building a few samples with a 3x3 hub and a Bafang ultra motor. Our prototypes will be ready by January 2025. I will update the... -
TThis UCpro was purchased from Wattwagons which is now out of business. It had a Kindernay IGH which failed after 350 miles, then tried a...
-
TTPEHAK replied to the thread New High Torque IGH announced by 3x3.What is the maximum speed you can achieve with this setup? The rear pulley looks quite large.
-
TI have the 3x3 Nine on my Ebike, and I love it. The IGH shifts smooth, and at a stop. The 3x3 handles 250 nm of torque, and requires no...
-
TI now have over 800 miles on the hub with no issues. 3rd and 6th gears are not totally silent like the rest, but that has always been...
-
TTPEHAK reacted to Merlin's post in the thread WattWagon Ultimate Commuter Pro (UCP) in depth review with Like.
I posted this elsewhere, My UC Pro now has the new 3x3 Nine IGH with a belt drive, and it is performing extremely well! The first three...
-
TTPEHAK replied to the thread NYC wants to license and register ebikes and scooters.It reduces traffic on the roads. If they will start putting more regulations on ebikes it will increase the traffic on the roads, more...
