Recent content by Snookguru101

Code 30 on most e-bikes means connection issue it could be any connection. It also can be water even a small amount between the battery and the battery's sleeve that you lock the battery down to the bike. I have had a small amount of water getting near the connections of the battery and the...

Do you have a light on your version.

They're either 18650s or 21700. The one with 2400 lumens has two 21700 batteries 700 batteries

The lumens are correct that light is very bright very powerful I loved it while it worked. Built a nice e-bike topped it off with that light the light worked for 2 months minimal use. It won't accept the charge it will not light up. Tested my batteries there is 3.98 volts each they're fine. The...

Don't leave your battery dead for a month before you charge it here is lithium ion batteries like to have juice in them

Good idea that's one of the options I'm going to try here. I was waiting for the new replacement battery to arrive before I cracked open the old battery. Thanks SafeRide

No it was called an observation attach to an answer

I know I'm my model and a lot of models with LCD screens have adjustments it worked. that I can set the percentage from 0 to 100 and each pedal-assist gear weather it is 0-3, 1-3 ,0 - 5,1-5, 0-7,1-7,0-9or1-9 # of pedal settings. 0 through three gears are all the way up to 9 gears. Each gear...

For one with wife do you have? Because rattan which is also yammy has I-pas Pat and buy them. Text your kinetic energy from coasting and breaking puts it back into the battery. Some systems will recharge their batteries slightly from breaking only. But it's a very small minoot amount. Also on...

Having the same issue was it your battery?. My brand new e bike is sending me a flashing battery through the LCD screen. In the beginning if I power it off and then back on it would show fully charged on the LCD screen. But as soon as you take off it goes back to flashing. It still operates...

I'm having pretty much the same issue may I ask you a question. When you put a fully charged battery on the bike. Then power the bike up. In the beginning does it show your battery at full power on the LCD screen and then once you take off it'll drop down to nothing and start flashing. That was...

The battery itself as a button when you push it it tells you how many likes you have on the battery itself. Not the reading from the LCD screen. The reading from the battery is more of a direct reading it's going to give you a more accurate reading then they then they LCD screen. Sometimes my no...

You still should have a LCD screen that is accurate with your real battery level because it's a pain in the butt with these dummy battery bars. Ivar will only tell me if percentage range is the battery is in here is a battery can say all its bars and . But that last bar is between 86 percent...