smorgasbord's latest activity

I previously worked at a off-road vehicle manufacturer. On the assembly line, they not only used torque wrenches, they used digital...

I do NOT recommend using two actual magnets. If you have an EggRider or some other display that can set a large wheel diameter, then you...

Don't know what kind of charger you have, but I've done several profiles on my Grin Satiator charger: For my 52 volt (nominal)...

The first post in this thread has this table: SpdXX In KPH Out KPH Spd0 0.01 4.5 Spd20 2 8.5 Spd40 6 13.5 Spd60 10 18 Spd80...

I've been running X01 chains since before I first posted about them, so a few years. Two Luna Apollos, with 1500 watt output, bikes are...

Unless something has changed in the past couple of years, multiple tests have ranked the SRAM X01/XX01 12-spd chains as the longest...

Note that such mounting will affect how well the helmet performs - between the added weight and location of the camera on the visor...

I second the recommendation to get a new bike shop. Brake bleeding/fluid change is a standard maintenance item that any partially decent...

I recommend reading this older thread on Mid-Drive Chain Care. The 80% wear figure your bike shop said you had was hopefully based on...

Hi AndZab, thanks for looking into this. I personally find the Delta Voltage Table to be the most confusing part of Ultra tuning, as the...

I had a DM last month from someone tuning his uart Ultra motor, and seeing behaviors he attributed to the SPD torque tab being related...

So, I managed to do some quick testing yesterday and can confirm, that it actually works now. My bike will stop Power from the motor...

It's also important to note that both the display and the Bafang controller have their own independent settings for wheel...